Product category:
Vertical machining centres (VMC)
News Release from: C Dugard | Subject: Eagle 600 vertical machining centre
Edited by the Manufacturingtalk Editorial
Team on 13 December 2006
Vertical machining centre absorbs
vibration
A vertical machining centre's vibration absorbing ribbed structure enables the machine to carry out high stock removal, especially when milling.
Developed for a very cost-effective performance and capability with ISO 40 spindle options of 15,000, 10,000 or 8,000 rev/min under control of Fanuc OiMB control, the latest Dugard Eagle 600 vertical machining centre reveals its in-built rigidity in production from high grade FC-30 iron castings This level of construction with a vibration absorbing ribbed structure enables the machine to cater for high stock removal, especially when milling
This article was originally published on Manufacturingtalk on 22 May 2006 at 8.00am (UK)
Related stories
VMC rigidity favours high metal removal rates
Vertical machining centre shown at MACH 2006 revealed its in-built rigidity from high grade FC-30 iron castings with a vibration absorbing ribbed structure for high stock removal, when milling.
Travelling column VMC has dual-pallet indexing
Vertical machining centre with a travelling column design and integrated rotary dual-pallet indexing system provides higher levels of productivity and output and efficient workpiece loading/unloading.
Wide range of CNC machines will suit all tastes
High speed lathes, as well as vertical and horizontal machining centres, to suit all tastes, will be exhibited at Mach 2002 by C Dugard.
The table size on the C Dugard of Hove, Sussex, machine is 700mm by 450mm and axis strokes are 600mm in X, 460mm in Y and 500mm in Z.
In addition, a fully integrated fourth axis can be specified as an option.
A 16 tool position carousel will accept tools up to 90mm diameter as standard but with adjacent pockets left empty, this can be increased to 127mm and 6kg in weight.
Toolchange time is six seconds.
Rigid tapping is standard.
The all new heavy duty compact guarding in the latest blue and silver livery requires a small shopfloor footprint of just 2.2m by 2m and has a very low front opening slide-aside door enabling loads up to 350kg to be easily manipulated onto the table.
Feed rates are fully programmable up to 10m/min with rapid rates of 24m/min in each axis to a positioning accuracy of +0.005mm and repeatability of +0.004mm.
Typical of all C Dugard specified machines is the range of options available to enable customers to tailor the machine to their requirements.
For instance, in addition to the spindle speed variants there are options of 7.5kW or 9.2kW motors, through spindle coolant at 10 to 20 bar pressure, a higher pressure coolant pump and further control systems of Siemens 802D or 810D with ShopMill software. Request a free brochure from C Dugard ...
• C Dugard: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
