Product category:
Vertical machining centres (VMC)
News Release from: C Dugard | Subject: Five axis machine
Edited by the Manufacturingtalk Editorial
Team on 09 October 2007
Five axis machining of aerospace
components
A Hedelius RS 125-K supplied by C Dugard to Oldland CNC Engineering, using five-axis technology, enables machining of larger aluminium and titanium aerospace components.
The ability to machine larger aluminium and titanium aerospace components, using five-axis production technology, is high on the agenda for Bristol-based Oldland CNC Engineering, that has prompted the recent installation of its third Hedelius five-axis moving column vertical machining centre The key factor in the choice of this production platform for John Tucker, managing director, was the ability to machine in three-axis mode to say produce original reference or datum faces on one side of the machine and then, via a large programmable trunnion mounted rotary and tilting table, fitted to the other side of the machine base, produce true five-axis toolpaths in a single cycle on the remainder of the component
This article was originally published on Manufacturingtalk on 26 Jan 2006 at 8.00am (UK)
Related stories
Travelling column VMC has dual-pallet indexing
Vertical machining centre with a travelling column design and integrated rotary dual-pallet indexing system provides higher levels of productivity and output and efficient workpiece loading/unloading.
Wide range of CNC machines will suit all tastes
High speed lathes, as well as vertical and horizontal machining centres, to suit all tastes, will be exhibited at Mach 2002 by C Dugard.
Indeed, with the Hedelius RS 125-K supplied by C Dugard of Hove, Oldland has the best of both worlds because a single operator can prepare, manipulate, and load/unload, deburr or inspect a component on one side, while the machine continues its automated cycle on the other and thus maximises productivity and machine utilisation.
The Hedelius is not the first five-axis venture for this progressive 50-man company.
In addition to two previous installations of the smaller capacity Hedelius RS 80 machines, also sourced from C Dugard, has been two large capacity Edel CyPort 4020 five-axis gantry machining centres the first installed in 2004, the second 18 months later.
Further reading
Low-cost turning and MCs cost under GBP 50,000
High-speed vertical turning and machining centres offering production times that are significantly faster than current machines can achieve - with up to 96m/min rapids - cost under GBP 50,000.
Double-acting ballscrew cuts machine downtime
Very fast-moving mill-tap centres, zippy machining centres and a very nippy pick-up spindle vertical turning lathe are the results of applying a double-acting ballscrew axis drive.
Super-fast machines do not use linear motors
An "amazing response" was given at MACH 2002 to the UK launch of CNC machines offering production times that are significantly faster than current machines, but costing less than GBP 50,000!
As a result, the first Edel machine took the company into Airbus A380 component machining providing the capability for structural parts such as wing skins, that is a particularly successful area of expertise for the Bristol company.
Explains John Tucker: "Following the first Edel we became more competitive and significantly increased our order book for large and more complex parts.
That success led to the second machine with all the advantages of common tooling, fixturing and programming." The Edel has a capacity of 3,970 mm by 2,310 mm by 1,250 mm and will accept tools up to 130 mm diameter by 300 mm long in the 18,000 revs/min, 21 kW spindle.
The Heidenhain i TNC 530 controlled NC head that is carried on a Z-axis ram has direct drives to the +/- 200o rotational C and +/- 110o swivelling A-axes that can be positioned to an accuracy of +/- 0.002o.
This level of accuracy has proven to be critical, in the type of components Oldland now produce.
Like the Hedelius machines, the Edel gave flexibility to cope with a wide range and challenging components and when required, multiple quantities of smaller parts can also be positioned around the table area to further improve machine utilisation while helping to reduce work in progress and cycle times.
Oldland was established in 1975 by brothers David, having a design background and John with that of a toolmaker.
As the company's track record confirms, the business is almost entirely devoted to serving the aerospace sector that is very close to its doorstep in Barton Hill, Bristol.
Customers rank as blue chip names in the industry including Airbus UK, GKN Aerospace Services, GE Aviation and GKN Aerostructures, Yeovil and in recent years has chalked up worthy creditations including 'Supplier of the Year' awards.
Five-axis machining is viewed by many as an expensive and complex system to manage and support, especially in the subcontract arena.
But here, Oldland has scored an important advantage by taking the technology on board.
"We never really know what is around the corner," says John Tucker, "but we have the flexibility and the capability to utilise high power at low speed for machining titanium and the high speed required for aluminium with all the advantages gained by applying the technology." At both ends of the material spectrum, the ability to combine operations was important to guarantee to meet the geometry requirements of the customers' design engineers for feature to feature relationship achieved because of the capability to position within the same cycle.
But John Tucker is not complacent.
He maintains: "Five-axis working was new to us and it took a long time to get fully conversant and up to speed.
You need a totally different approach to machine a part and by investing in Mastercam, Catia V5 and Vericut to write and modify toolpaths before sending programs to the machine tool made the transition more bearable.
You really do not learn until you are on the shopfloor and the machine is in cut." He continues by reflecting the reaction to his investment by customers: "They have been very complimentary about the quality levels we have been able to achieve using this technology and especially the high levels of surface finish." To this he adds: "Due to the tooling always being applied at the most beneficial position to achieve a cut, there is no compromise.
This enables maximum metal removal and the maintenance of the benefits from the most effective tool geometry.
We have found the cutter path and stepover can be difficult to detect and especially once the surface coating is applied to the parts because the surface finish is so good." He also maintains that probing critical dimensions on the machines prior to removal has resulted in only nominal differences of a few microns to when parts are later checked on the company's co-ordinate measuring machines.
"That is an important endorsement to the repeatability of the process," he qualifies.
The Edel has the advantage of the NC head using patented linear drive torque motors, two for the swivelling A-axis and one for the rotating C-axis.
These permanently energised synchronous motors have zero backlash and high dynamic movement.
The outer rotor is in effect, an outer race around the stator that enables the magnetic force to create a significantly higher torque when compared with inner rotors of the same dimension.
When the operational cycle requires A and C-axes to be changed, as when taking roughing cuts, the high stall torque of the rotor acts as a brake in addition to the mechanical clamping of the axes giving maximum rigidity.
With a 10 m/min maximum feed rate, as well as a 360o/sec swivelling speed and 100 revs/min rotational speed for the two axis NC head which has direct measuring scales, the Edel CyPort 4020 provides a fast simultaneous machining capability using five-axes of motion.
The capability of the new Hedelius RS Kombi machines to create pendulum machining cycles enables each of the six faces of a component or, two totally different parts, to be produced simultaneously by loading one side of the table whilst the other is machining.
In effect, used properly this configuration enables productivity to be significantly improved.
The machines also employ ROTA SWING technology developed by Hedelius enabling both three-axis and five-axis simultaneous machining to be employed on the same machine bed.
The machine also has the capability to hold right angle heads and special attachments in the spindle.
Such is the area of the fixed table, in the latest RS 125-K, this equates to 1,250 mm by 2,500 mm that additional indexing, rotary, swivelling and compound table units can easily be added to provide additional flexibility to the trunnion area.
Overall, the travelling column RS 125-K has an X-axis of 4,500 mm, a Y-axis of 1,250 mm and 770 mm in Z.
The machine has the optional 12,000 revs/min spindle and the table a swivel angle of +10o to - 90o and a full 360o rotation in the C-axis.
The swing of the rotary table is up to 1,600 mm diameter that allows Oldland's production engineers to pass larger components through the machining envelope and take maximum advantage of its 56 tool carrying capability. Request a free brochure from C Dugard ...
• C Dugard: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
