Product category:
Sealing equipment
News Release from: Ceetak | Subject: LVH heat seal system
Edited by the Manufacturingtalk Editorial
Team on 12 September 2001
Solving control problem caused by lost
heat
Ceetak were asked by a major machine manufacturer to redesign its heat seal system incorporating Ceetak's very own LVH system but with key design modifications.
Ceetak were asked by a major machine manufacturer to redesign its heat seal system incorporating Ceetak's very own LVH system but with key design modifications This new system was retrofitted on an existing machine to eliminate the problems associated with their traditional systems
The traditional system incorporated cartridge heaters, which radiated a lot of waste heat from a large metal blade.
Making it difficult to control.
Piped water through coolers were used which added cost and made the system static.
Ceetak's LVH system was designed into keep the temperature under control.
The unique constant heat system with miniature blade section and constant digital control enabled the removal of all ancillary cooling systems even when running at 220 deg C reducing costs and giving the mobile machines enabling additional machines to be wheeled in to meet production requirements.
• Ceetak: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
