Product category:
Machinery/plant guarding and protection
News Release from: Castell Safety International | Subject: BEMF motion-monitoring unit
Edited by the Manufacturingtalk Editorial
Team on 02 April 2003
Variable run-down machinery safely
stopped
An innovative motion-monitoring product for trapped-key access control systems ensures that motor-driven equipment with a variable run-down time has completely stopped before accessing.
An innovative motion-monitoring product for use with trapped-key access control systems has been designed by Castell The BEMF unit ensures that motor-driven equipment with a variable run-down time - typically mixers, hammer mills and pellet mills - has completely stopped before access is possible
This article was originally published on Manufacturingtalk on 19 Feb 2003 at 8.00am (UK)
Related stories
DIN rail-mountable relay monitors motor safety
Motor safety relay is capable of monitoring the back EMF of practically all electrical motor applications to detect whether it is safely at rest or in motion.
Single key access switch signals alerts
A single-key access safety switch, which is suitable for use on hinged and sliding doors, can be used to switch off a machine via its control circuitry and initialise an alert signal.
This avoids reliance on a fixed time delay, which can overcompensate run-down times for lighter loads.
While an electric motor is rotating, whether powered or not, it generates an electromotive force (EMF).
This is monitored by the BEMF unit.
When the BEMF detects zero EMF, and thereby establishes that the motor has come to a complete standstill, it releases a trapped key corresponding to a lock on the machine's guard hatch.
This key can then be used to gain access to the machine.
The BEMF eliminates the time wasted by fixed-delay systems, since it ensures that machine access is permitted as soon as the run-down is complete; run-down times will vary according to the load in the machine.
The BEMF unit can be connected to both AC and DC motors, as well as motors with DC braking systems and variable-speed drives.
It has been designed to provide the highest level of safety when installed as part of an access control system for dangerous machinery, and is suitable for category 4 safety applications.
In contrast to movement-sensing devices, whose proximity sensors need to be positioned adjacent to a motor's moving parts, installation of the BEMF is facilitated by the fact that it can be situated at the motor's control.
• Castell Safety International: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
