Crown Capacity In Middle East Gets Boost
A
Crown Holdings product story
Edited by the Manufacturingtalk editorial team
Dec 22, 2004
Crown has announced that its affiliate, Crown Bevcan Europe and Middle East will substantially increase beverage can production capacity in the Middle East.
Crown has announced that its affiliate, Crown Bevcan Europe and Middle East will substantially increase beverage can production capacity in the Middle East.
It will do so in conjunction with its long-standing regional partner, Ahmad Hamad Algosaibi and Bros.
Crown is to install two new lines; one in its Jeddah (Saudi Arabia) plant and the other in its Dubai (United Arab Emirates) plant.
Crown expects the first line to be operational early in 2006 with the second line operational by mid-year in 2006, bringing an additional capacity of 1.5 billion cans to the region.
That follows a three-year programme of capacity enhancement of over one billion cans in Crown's existing plants in Jordan, Saudi Arabia and the United Arab Emirates culminating in the start-up next April of a second line in Jordan.
The plants, located in Amman, Dammam, Jeddah and Dubai, are all joint ventures between Crown and Ahmad Hamad Algosaibi and Brothers.
"These investments will allow us to further build on our long-established position in the Middle East.
Crown is deeply committed to providing our customers with the cans they need to meet current growth in this dynamic market and anticipated long term demand," said John Clinton, senior vice-president of Crown Bevcan Europe and Middle East.
"Crown's expertise in the production of beverage cans and knowledge of the Middle East market make them an excellent joint venture partner.
The company's decision to continue to invest with us in the region is a very positive message for existing and potential customers alike," said Sheik Saud A Algosaibi, managing director of Ahmad Hamad Algosaibi and Bros.
In addition to the capacity expansion, the company has also confirmed that construction of the new beverage can facility in Tunisia (North Africa) is well underway.
The plant, in the Tunisian capital of Tunis, will be operational in the second half of 2005 and will have an initial annual capacity of 635 million cans.
Not what you're looking for? Search the site.
Google Ads
Contact Crown Holdings
Related Stories
- Division Focuses On Robots For Short-Run Products
- Large strains precisely measured
- Maintec returns to Birmingham NEC in 2009
- Packaging design to be rethought
- Industry ill-prepared for vibration regulations
Browse by category
-
Automation, assembly and computer systems (1,338)
- Automation and assembly equipment (278)
- Automation and assembly systems (79)
- Automation, assembly and computer systems (4)
- Automation, control software (154)
- Consultants (automation systems) (3)
- Control systems, panels, HMIs, interfaces, screens (477)
- Industrial computers, PCs, PLCs, notebooks (266)
- System integration services (77)
- Books, CDs and Videos (218)
-
Cutting tools (2,079)
- Abrasive grinding wheels, abrasives (81)
- Chucks and collets for rotational work (97)
- Circular saws and abrasive discs (3)
- Cutting lubricants, coolants, systems and treatment (223)
- Cutting tools (12)
- Drilling, boring and reaming (151)
- Honing, lapping and burnishing (8)
- Milling cutters (356)
- Saw blades (10)
- Special purpose/multi-function tooling, broaching (81)
- Swarf management equipment (6)
- Tapping, chasing and thread rolling, attachments (10)
- Threading tools (60)
- Tool and cutter grinding (147)
- Tool and cutter manufacturing (23)
- Tool and cutter pre-setting (36)
- Tool identification and handling (16)
- Tool management systems, handling and software (51)
- Toolholders (107)
- Tooling materials and inserts (81)
- Tooling services (9)
- Turning tools (200)
- Vices, chucks, towers, pillars, cubes, tombstones (79)
- Workholding - miscellaneous clamping systems (232)
-
Finishing, preparation, coating and painting (1,182)
- Cleaning media and cleaning systems (381)
- Coatings and coating systems (148)
- Deburring, de-flashing and fettling (135)
- Finishing, preparation, coating and painting (3)
- Heat treatment, furnaces, quenching media (11)
- Integrated systems (10)
- Metals heat treatment, mechanical stress relieving (22)
- Paint and painting systems (68)
- Plating and plating systems (66)
- Polishing, buffing and surface texturing (48)
- Quality control (6)
- Sealing equipment (13)
- Thermal processing equipment (110)
- Washing and pretreatment (161)
-
Health and Safety Equipment (1,803)
- Environmental contamination, extraction, sensors (332)
- Health and Safety Equipment (1)
- Industrial Vehicle Safety (127)
- Lighting systems - plant and machinery (42)
- Machinery/plant guarding and protection (271)
- Personal protective equipment, devices (501)
- Relays, switches, interlocks, controls, electrical (300)
- Signs for Health and Safety (57)
- Slip, trip and fall protection (172)
-
Industry news, commerce, exhibitions, education (8,325)
- In-house manufacturing exhibitions, events (169)
- Industrial and management training courses (279)
- Industrial consultancy services (417)
- Industrial Development Agencies (65)
- Industry news, commerce, exhibitions, education (5)
- Manufacturing conferences and exhibitions (313)
- Manufacturing dealerships, agencies, acquisitions (1,566)
- Manufacturing exhibitions (325)
- Manufacturing finance: insurance services (10)
- Manufacturing finance: investment support (47)
- Manufacturing industry news (2,305)
- Manufacturing orders, contracts, financial reports (1,189)
- Manufacturing seminars and workshops (219)
- People in Manufacturing (1,007)
- Professional Associations (310)
- R and D, technical centres, universities (99)
-
IT for industrial and commercial applications (2,145)
- Data acquisition software and systems (145)
- HR, Payroll, Time and Attendance software (47)
- IT for industrial and commercial applications (12)
- Manufacturing Information Technology systems (351)
- Manufacturing IT Platforms (68)
- Programming aids and applications (347)
- Training Aids and eCommunication (446)
-
IT for manufacturing management and production (4,172)
- Analysis, simulation and mathematical software (160)
- Business management systems (413)
- CAD systems, CAD translation and solid modelling (198)
- Document and workflow management (196)
- EDI - electronic data interchange and software (8)
- Enterprise Resource Planning software (753)
- Factory data acquisition (non-RFID), data logging (321)
- Industrial networking and communications (355)
- IT for manufacturing management and production (21)
- Lean Manufacturing (41)
- Manufacturing Resource Planning software (57)
- Product life cycle management (121)
- Production costing, job estimating and quotations (70)
- Production, shopfloor planning, control, scheduling (157)
- RFID systems, wireless hardware and software (285)
- Scanners, readers for codes, bar codes, labels (25)
- Supply chain management and software (142)
- Warehouse and logistics management software (50)
- Work-in-progress tracking software (46)
-
Machine Tools: Cutting (4,332)
- 5-axis machining centres (161)
- Abrasive machining - manual and CNC machines (232)
- Bar feeders, loaders and parts catchers (59)
- CAM, software, off-line programming (785)
- CNC automatic lathes (298)
- CNC lathes (281)
- CNC mill/turning/multi-tasking centres and VTLs (361)
- Control systems, DROs, etc, for machine tools (275)
- Drilling machines and drill/tap centres (54)
- Flexible machining cells and systems (85)
- Honing, polishing, burnishing and lapping (37)
- Horizontal machining centres (156)
- Large milling and boring machines (96)
- Machine spindles and spindle attachments (33)
- Machine Tools: Cutting (6)
- Machining centres (159)
- Manual lathes and manual/CNC lathes (37)
- Micro- and nano-machining (30)
- Milling, boring, routing machines - manual and CNC (149)
- Misc machine tools, gear cutting machines (99)
- Miscellaneous machine tool equipment (165)
- Pick-up spindle turning, multi-tasking, turning (46)
- Portable power tools (131)
- Probes, sensors, tool detection, calibration (85)
- Rotary and linear transfer machines (48)
- Sawing, cutting-off machines, automation systems (129)
- Vertical machining centres (335)
-
Machine Tools: Metal working, forming, forging (1,756)
- CAM and software for sheetmetal working, EDM (158)
- CNC laser cutting and profiling machines (173)
- CNC laser machining, engaving and welding (22)
- CNC plasma-arc, oxy-fuel gas cutting m/cs (93)
- CNC punching and profiling (195)
- CNC water jet cutting and profiling machines (156)
- Cold roll forming systems and software (13)
- Control systems for metalforming (25)
- EDM diesinking (68)
- EDM wire and diesinking, ECM, miscellaneous (26)
- EDM wire cutting (137)
- Forging presses, hammers and screw presses (10)
- Forming, swaging and extrusion machines (8)
- Guillotines, shears, circling, notching machines (8)
- Jigs, fixtures, special tooling and gauging (9)
- Laser, high energy beams - machining, forming (48)
- Machine Tools: Metal working, forming, forging (3)
- Metalforming lubricants (48)
- Misc metal forming machines and equipment (21)
- Power presses, hydraulic (57)
- Power presses, mechanical (53)
- Press shop and sheet metal work automation (104)
- Press tools - manufacture, CAD/CAM, software (68)
- Pressbrakes and folding machines (89)
- Special purpose presses and equipment (59)
- Structural bending machines & steelworkers (13)
- Tubeworking: bending, cutting-off, end working (92)
-
Machine Tools: moulding (1,196)
- Blow moulding (16)
- Diecasting machines and equipment (32)
- Diecasting materials (4)
- Extrusion machines (39)
- Handling and automation equipment (94)
- Injection moulding (205)
- Joining and bonding (21)
- Machine Tools: moulding (1)
- Metals foundry, materials and equipment (50)
- Mould and die making, machining, CAD/CAM (266)
- Moulding materials (231)
- Profiling, trimming, routing and drilling (13)
- Rapid prototyping/manufacturing equipment (178)
- Second operation equipment (15)
- Special purpose moulding equipment (28)
- Sub-contract plastics machining services (3)
-
Manufacturing support (8,958)
- Actuators, motion systems (358)
- Air compressors (129)
- Airline equipment, filters, drains and traps (146)
- Bearings and guideways - rotary and linear (330)
- Benches, work stations, parts storage, cabinets (76)
- Component marking and labelling (non-laser) (221)
- Dispensing, filling and weighing systems (282)
- Drives, motors, transmission, couplings, clutches (1,505)
- Electrical systems (1,001)
- Gantries, manipulators, positioners, tables (49)
- Hand tools - wrenches (25)
- Hydraulic equipment and fluids (156)
- Industrial gases and associated equipment (109)
- Laser marking systems (154)
- Lubrication - lubricants and lubrication systems (179)
- Machine and production line ancillaries (473)
- Maintenance planning, services and equipment (418)
- Manufacturing support (9)
- Metals and materials, stockholding (182)
- Monitoring and sensor equipment and systems (1,529)
- Plant services equipment, filters, filtration systems (432)
- Pneumatic equipment (344)
- Positioning stages - linear, rotary, multi-axis (74)
- Pumps and valves (255)
- Robots and robotic systems (403)
- Seals, gaskets, bushes (117)
-
Materials handling and storage (1,076)
- Automated handling systems, AGVs (41)
- Conveyor systems (production and general purpose) (249)
- Cranes, hoists, winches, chains and ancillaries (111)
- Loading dock and yard handling equipment (50)
- Logistics and freight transport (89)
- Materials handling and storage (9)
- Misc. equipment, batteries, battery charging (45)
- Other lifting, loading and elevating equipment (84)
- Specialist, bespoke handling equipment and services (48)
- Stack and picking: aisle-, tower-, container trucks (66)
- Standard fork lift trucks and attachments (107)
- Storage and handling services, consultancy (23)
- Storage hardware and storage and racking systems (86)
- Tugs, tractors, trucks, pushers, jacks, trollies, etc. (65)
- Weighbridges, weighing systems (3)
-
Metrology instruments and systems (3,823)
- Calibration Instruments (333)
- Coordinate measurement arms, systems, software (105)
- Coordinate measuring machines (CMM) and software (185)
- Gauging and Hand Tools for Inspection (166)
- Laser-based systems (51)
- Measurement and Quality Software and SPC (1,024)
- Measurement systems including encoders (272)
- Metrology instruments and systems (3)
- Metrology standards room equipment (15)
- Non-contact, Optical, X-ray and Laser measurement (738)
- Probes and sensors (336)
- Production metrology, measuring equipment, DROs (24)
- Surface, Profile and Topology systems (48)
- Thickness gauging and measurement (26)
- Vision and scanning systems (363)
-
Packaging (2,863)
- Adhesives and tapes materials (26)
- Anticounterfeiting technology (5)
- Bags and bagmaking materials (79)
- Bottles, bottling and jars materials (182)
- Boxes and cases materials (44)
- Bulk containers materials (28)
- Cans, canning and tins materials (22)
- Carton converting materials (26)
- Closures, fasteners and dispensers materials (92)
- Coding and marking materials (99)
- Contract packing (16)
- Control and inspection (75)
- Conveying, handling and end-of-line equipment (289)
- Filling, (43)
- Film materials (95)
- Food Packaging (180)
- General packaging materials (848)
- Label converting and sleeving materials (157)
- Packaging (5)
- Packaging design materials (36)
- Packaging exhibitions, conferences and seminars (75)
- Packaging management software (36)
- Packaging trade organisations (42)
- Pharmaceutical and medical packaging (51)
- Printing materials (198)
- Weighing and counting (112)
-
Specialist Manufacturing and Metals Producing (1,439)
- Cosmetics manufacturing: packaging and dispensing (4)
- Electronics manufacturing: equipment, automation (272)
- Electronics manufacturing: quality control (120)
- Food and drink manufacturing: packaging, bottling (178)
- Food and drink manufacturing: process equipment (303)
- Metals finishing lines (33)
- Metals processing plant (143)
- Motor sports manufacturing: coating and finishing (4)
- Motor sports manufacturing: fabrication, assembly (39)
- Motor sports manufacturing: machining, CAM (69)
- Pharmaceutical manufacturing: handling, packaging (49)
- Pharmaceutical manufacturing: production software (4)
- Pharmaceutical/medical manufacturing: production (67)
- Rolling mills (101)
-
Subcontracting services (1,293)
- Casting, die-casting, forging, hot and cold working (62)
- Electronics and electrical design and manufacture (198)
- Fast prototyping and pattern making services (73)
- Gear making and gear systems, related services (7)
- General machining (212)
- General subcontracting services (68)
- Heat treatment (12)
- Machine, plant rebuild, overhaul, upgrade, repair (21)
- Machining and assembly (60)
- Mould, die and tool making (107)
- Plastics and rubber moulding (102)
- Plating and galvanising services (9)
- Sheet metal presswork, stamping and fabrication (189)
- Sheet metals, plate, non-metals cutting, profiling (48)
- Special purpose machining (56)
- Subcon Exhibition (40)
- Subcontracting services (1)
- Treatment and finishing (28)
-
Testing and quality control systems and services (5,408)
- Calibration and Testing Services, Consultancy (518)
- Consultants and services: quality control, assurance (16)
- Electrical and Electronic Testing (926)
- Inspection and testing (non-metrology), NVH (247)
- Machine vision systems and accessories (358)
- Materials Testing (2,688)
- Miscellaneous Instruments (165)
- Non Destructive Testing (224)
- Quality control systems/SPC software (125)
- Testing and quality control systems and services (7)
- Torque measurement devices and systems (134)
- Used machinery and machine tools (38)
-
Welding and Joining (1,664)
- Adhesives and adhesive bonding equipment (245)
- Arc welding equipment, manual and automatic (367)
- arc-air gouging, lancing equipment (11)
- Automatic and robotic welding systems (197)
- Handling and automation equipment (7)
- Laser and electron beam welding (97)
- Manual plasma-arc cutting equipment (10)
- Mechanical fasteners and equipment (307)
- Non-destructive testing equipment (21)
- Oxy-fuel gas cutting, joining, cutting (30)
- Resistance welding equipment (48)
- Seam-tracking, guidance systems (22)
- Special purpose joining equipment (36)
- Thermal and weld hardfacing, coating, overlaying (9)
- Weld preparation equipment (16)
- Welding ancilliaries (182)
- Welding and Joining (2)
- Welding consumables, rods, wires, fluxes, powders (40)
- Wood and non-metallics working (81)
