Product category:
Metals processing plant and equipment
News Release from: Corus Northern Engineering Services | Subject: Air mist spray cooling - slab caster
Edited by the Manufacturingtalk Editorial
Team on 23 July 2007
Air mist spray cooling ups slab cast
quality
Steel slab continuous caster is now producing higher quality steel grades since its cooling system was converted from conventional water feed into air mist spray cooling.
Corus Process Engineering (CPE), part of Corus Northern Engineering Services (CNES), has completed a detailed study into the conversion of a water-only cooling system on a steel slab caster in Mexico The slab caster now uses an air mist spray cooling system, which has enabled the continuous caster to produce higher quality grades of steel, while providing a more efficient cooling method
This article was originally published on Manufacturingtalk on 3 Oct 2006 at 8.00am (UK)
Related stories
Acoustic monitor saves 5 weeks' steel production
An accoustic monitoring system detected early signs of distress and an automatic review of trends enabled the remaining bearing life in the tilting of basic oxygen steel converters to be predicted.
Acoustic emissions monitoring system
Acoustic emission monitoring equipment has a high sensitivity to machine faults but is also immune to audible noise and low frequency background vibration.
The work was carried out on the number three slab caster at Altos Hornos' steel manufacturing plant based in Monclova, Mexico.
The main contractor for the study, spray system and nozzle manufacturer Lechler, was responsible for defining the new secondary cooling system on the caster, including the air mist spray nozzles.
CPE was responsible for sizing pipework, control systems, instrumentation, compressors, accumulators and dryers, and any hardware and software modifications.
Further reading
Blast furnace blowers control updated
In a blast furnace turbo blowers upgrade project, software enabled a single control strategy and graphical user interface for the blowers - a project, which won an award.
Data logging and remote radio control for trains
Corus Northern Engineering Services has introduced a radio controlled system enabling data trending of key engine and safety parameters on Corus Teesside locomotives.
Metal producing products expertise expands
Manufacturer of high conductivity copper castings has built up considerable expertise in water-cooled copper products in very high temperature environments such as blast furnaces.
Ian Ellis, manager Projects and Technology at CPE commented: "The study was a two-stage process".
"The first stage was to visit the plant in Mexico and understand the potential issues that the conversion project might cause to the continuous caster process".
"Secondly, we had to make recommendations on what equipment and pipework would be required, size it all, price it and then supply and implement, if required".
Working closely with Lechler, which produced detailed process models of the caster plant and new air mist system, CPE had to determine whether the existing water pipework could handle these new flows.
Once the existing piping had been surveyed, CPE then had to do the following.
* Specify and size all new air and water pipework.
* Specify the compressors, accumulator and dryer.
* Recommend the location of all equipment.
* Review all valves and instrumentation equipment to see if it could control the water system within the ranges required for Lechler's new air mist system.
Ellis continued: "Converting from water-only to air mist cooling provides a wider turn down ratio and more efficient cooling for the caster".
"Although most steel makers now use air mist systems on their continuous casters, the study demonstrates CPE's knowledge and expertise in managing turnkey projects for clients, from the feasibility stage, through detailed design and engineering, right through to the actual supply, installation and commissioning of the new systems." CPE prepared budget proposals for Lechler for the supply of the new equipment.
The proposals included the following.
* Recommendation of new operator interface displays.
* Assistance in developing the new alarm system philosophy at the plant.
* Surveying the partially installed air system, including the specification and recommendation of new pressure and flow instrumentation where necessary for the isolation, control and monitoring of the air flows.
* About CPE - Corus Process Engineering works closely with customers, providing a range of engineering support services, including training, project management and a condition monitoring and asset management tools.
Established in the 1950s, CPE specialises in the refurbishment of continuous casting equipment, both within the Corus Group itself and for external customers.
The equipment is used throughout the steel production industry, and CPE is helping companies develop and monitor the performance of their equipment, including mould equipment, Top Zone and segment equipment.
CPE maintains a full inventory of spares that minimises turnaround times of these types of equipment.
CPE's portfolio of new development technologies includes 'Castclean', an integrated approach to ensure optimum levels of steel cleanliness from ladle to mould; 'Castcoat', ceramic-coated mould plates that increase the life of continuous caster mould plates by up to six times; 'Clinotec', which enables operators and maintenance staff to check the precise measurement of the vertical angle of the mould end plate; and the development, design and supply of 'periphery drilled rolls' which increase roll stability and life.
A significant proportion of CPE's revenues also come from the nuclear industry.
Since the 1950s, CPE has been supplying plant and equipment to the nuclear industry world-wide, including nuclear waste transport and handling equipment, storage flasks, shield doors and gamma gates. Request a free brochure from Corus Northern Engineering Services ...
• Corus Northern Engineering Services: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
