Product category:
Electrical systems
News Release from: CMP Products | Subject: Universal cable glands
Edited by the Manufacturingtalk Editorial
Team on 17 August 2007
Cable glands installed and maintained
easily
Universal cable glands are easy to install and maintain and are triple certified Flameproof and are suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 Hazardous areas for all types of cables.
CMP Products has introduced 'truly universal' cable glands, designed to meet a demand for high quality, 'universal' products, that are easy to install and maintain The Tri-Star range of cable glands are TRIPLE certified Flameproof, Type 'd', Increased Safety Type 'e' and Restricted Breathing Type 'nR', and are suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 Hazardous areas for all types of cables
This article was originally published on Manufacturingtalk on 28 May 2007 at 8.00am (UK)
Related stories
3D models of off-the-shelf telescopic slides
Telescopic ball bearing slide designer and manufacturer, Accuride International, has produced optimised 3D models of its 'off-the-shelf' products which can be downloaded via its website.
Full digital set-up on tension control system
A new digital tension controller is claimed to be one of the most comprehensive tension control systems currently available
The Tri-Star cable gland provides a flame proof seal on the cable inner bedding and the 'gas tight' seal has been tested to prove compatibility with restricted breathing equipment that relies upon flammable gases being excluded from the main enclosure.
The Tri-Star range provides mechanical cable retention and earth continuity via the cable armour termination, and an environmental/load retention seal on to the cable outer sheath.
Designed to make installation and maintenance quick and easy the detachable armour cone and AnyWay universal clamping ring arrangement allows the cable to be easily disconnected and reconnected to equipment.
These features also allows remote make off of the cable gland, ideal where the termination is to take place in confined spaces or areas of restricted access.
Separate tightening actions for the flame proof seal and the armour termination affords maximum control over the pressure applied to the cable inner bedding, and allows for the effectiveness of the 'gas tight' seal to be tested during the installation process.
CMP Products is to issue a new brochure detailing the entire range of CMP Products.
• CMP Products: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
