Product category:
Machine vision systems and accessories
News Release from: Cognex UK | Subject: Vision system
Edited by the Manufacturingtalk Editorial
Team on 29 March 2007
Vision system offers product
traceability
When Borg Warner needed to guarantee the quality of a new high added value component and to be able to trace the product from cradle to grave, they turned to vision systems from Cognex.
Being one of the biggest constructers and suppliers of automotive parts, Borg Warner cannot afford to make mistakes They needed to guarantee the quality of a new high added value component and to be able to trace the product from cradle to grave
This article was originally published on Manufacturingtalk on 7 May 2008 at 8.00am (UK)
Related stories
Vision system automates toxic filling
Cognex vision system enables a robot to locate different container stoppers for filling with dangerous and/or toxic fluids even when they arrive in various positions on the pallet.
Seminar attendance found right vision sensor
Manufacturer of advanced miniature filtering antennas for mobile, wireless and handheld devices needed a vision system with higher resolution, and found it at a seminar.
They decided to turn to Cognex whose vision systems already figure on many of their production lines and machines.
The resulting project was directed by Alema Automation, a Cognex Partner System Integrator (PSI) for the south west of France.
The challenge: Each piece needs to be marked, the precision and quality of the marking needs to be verified.
Further reading
Assembly systems provider makes vision choice
More demand from users for machine vision systems on assembly lines to support quality assurance led a German supplier to choose a provider offering user-friendly, reliable systems with support.
Part traceability made with vision technology
Korea's largest construction equipment manufacturer is now relying on vision technology to ensure complete parts traceability through character recognition.
Robots with vision speed van assembly by 20%
Adding a vision system to assembly robots reduced production and assembly time for a commercial vehicle by 20% while making assembly safer, more reliable, faster and cost-effective.
Finally, it needs to be confirmed that each piece has gone through the necessary quality and safety controls before being delivered.
The solution: VisionPro from Cognex along with the In-Sight 5110, Cognex Partner Product ESO'CR from Esox, another Cognex PSI as well as micro percussion marking machines from Technifor, another trusted partner of Cognex.
Once off the production line each piece is marked with micro percussion: 2 lines of alphanumerical characters indicating the product reference, the batch number, the team identity and the manufacturing date.
Following this, a first vision station consisting of an 8500 card and VisionPro (the library of vision tools from Cognex), reads the characters thanks to the software ESO'CR.
The information is then transferred to a Technifor engraver who converts them to Datamatrix and this code is marked on the other side of the piece.
The ESO'CR software has proved to be of added value to the automobile industry.
It has allowed us to stay within our budget and our time frame" explained Olivier Skalinski, project leader at Alema.
In order to avoid any error and to guarantee the staying power of the marking, an In-Sight 5110, installed beside the micro percussion machine, verifies the content and the quality of the marking.
Once marked, the piece then undergoes a series of hydraulic testing with 8 points of inspection.
Once out of the testing phase, the piece then passes to a second In-Sight 5110 vision station where it needs to be established that the piece has successfully undergone all the necessary tests.
Not an easy task.
The pieces that arrive at the second vision post may be dry and clean or they may still be oily from the testing process.
Despite the fact that the lighting and legibility conditions are completely different to those of the first reading station, the In-Sight 5110 is perfectly capable of reading the code on each piece without any extra configuration.
Alema was also obliged to take up another challenge: ensure that the In-Sight can communicate with the factory data base containing the results of the testing phase.
Alema developed a unique interface with this in mind enabling In-Sight to deliver a verdict for each piece: suitable (or not) for delivery.
Faulty pieces which are reparable are sent back to be fixed while the pieces that have been successfully checked and verified are directed to the packaging zone.
For maximum security, Alema has installed a third In-Sight 5110 system at the entrance to the packaging area, which performs a final check and verification of the piece.
The application has been developed and installed by Alema in record time: 2 days to confirm that the system worked correctly on prototype pieces, then one week to install at the factory site, including personnel training in use and maintenance.
The robustness of the In-Sight vision systems, their ability to cope with environmental changes in lighting and position allowed for the same material to be used on different work posts and also allowed Borg Warner to greatly reduce the amount of spare part stock kept at hand.
Another benefit, was the commitment of Alema Automation to the project in its entirety, (reading, marking and verification) thus avoiding any conflicts of interest between different suppliers.
"Thanks to the comprehensive nature of the Cognex solution and to their partner network, we have a high performance, cost-effective solution at our disposal" concluded Stephane Laval at Borg Warner..
Following the success of this solution, Borg Warner aims to adapt other production lines and deploy the same solution in order to optimise this traceability throughout their production processes.
• Cognex UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
