Product category:
Diecasting machines and equipment
News Release from: CSIRO | Subject: Heat treatment process for diecastings
Edited by the Manufacturingtalk Editorial
Team on 22 February 2006
Heat treatment strengthens HP die
castings
A novel heat treatment process provides large strength improvements - up to double strength - and an excellent surface finish for high pressure die castings, without blistering or distortion.
High-pressure die-cast (HPDC) parts made of aluminium are now able to have their strength doubled through a novel heat treatment process invented by Australian light metals researchers While heat treatment is commonly used to strengthen wrought and other cast aluminium parts, it has previously not been practical for high-pressure die castings
This article was originally published on Manufacturingtalk on 7 Jul 2008 at 8.00am (UK)
Related stories
Solvent-free powder coats heat-sensitive plastics
Dulux Powder Coatings and the CSIRO claimed that Customcoat QP solvent-free powder coating technology can be applied to heat-sensitive plastics and cured at low temperatures.
Purpose-built sensor arrays for corrosion
Tiny and often tucked away in hard-to-reach nooks and crannies, a novel array of sensors is poised to change the costly and resource-intensive process of fighting corrosion.
"Conventional heat treatment processes applied to HPDC components cause major blistering and distortion, that occurs when air bubbles trapped under pressure during casting expand as they are heated.
This ruins the parts," says Dr Roger Lumley of the Commonwealth Scientific and Industrial Research Organisation (CSIRO) "We have developed a heat treatment procedure that provides large strength improvements and an excellent surface finish, without blistering or distortion," he says.
Trials at the CSIRO's laboratories have shown that the new heat treatment can at least double the strength of high-pressure die cast parts.
Further reading
Process produces high intensity magnesium castings
A permanent-mould casting process that requires neither applied pressure nor a vacuum to fill the die produces high-integrity magnesium alloy castings - free of porosity and other defects.
Laser repair turbine blades in minutes, in situ
A laser welding technique is repairing power station turbine rotor blades in minutes - rather than days - through advances in the way repair metals stick together.
This means parts need not be as heavy as they currently are to do the same task - a factor that is particularly important in the automotive industry where lighter cars use less fuel and have lower greenhouse gas emissions.
"A lot of these components are designed for their loads and basically the stronger the material, the lighter you can make the part," says Dr Lumley.
"We would like to think that we could see a 30% weight reduction compared to current aluminium castings.
The die casting industry is very, very cost sensitive, and if you can use less metal per car part, you also save money." Dr Lumley says: "We have done trials on large batches of parts purchased from industry and developed treatments for those parts.
That has gone really well.
The trials show very few rejects due to heat treatment - in a recent batch of 575 parts, only 1% of the parts were rejected due to blistering." Dr Lumley says that while aluminium high pressure die casting worldwide is dominated by the automotive industry, other industries can use the new technique.
Example applications include builders' nail gun casings, and even door handles.
"Basically anything that requires cost effective mass production of fairly complex high strength aluminium castings can utilise this process," Dr Lumley says.
He says the new process could halve the cost of producing high-strength parts, which previously could only be made by alternate, more expensive manufacturing processes.
* About CSIRO - CSIRO is one of the world's largest and most diverse scientific global research organisations.
Working from sites across the nation and around the globe, our 6500 staff are focussed on providing new ways to improve your quality of life, as well as the economic and social performance of a number of industry sectors through research and development.
• CSIRO: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
