Product category:
Materials Testing
News Release from: Celsum Technologies | Subject: PR100A
Edited by the Manufacturingtalk Editorial
Team on 25 June 2003
Panel-Mounting, Expandable Data Logger
and Printer
Celsum Technologies supply the PR100A panel-mounting, programmable twin-channel datalogger and printer module, together with the DR100A four-channel expansion module, allowing a total of 6 channels.
Celsum Technologies supply the PR100A panel-mounting, programmable twin-channel datalogger and printer module, together with the DR100A four-channel expansion module, allowing a total of 6 channels of data to be monitored The unit is mains powered (90 to 240V AC), accepts inputs from Type K and Type J thermocouples, PTC and NTC sensors, PT100 platinum resistance sensors, and a 4 - 20mA current loop signal
This article was originally published on Manufacturingtalk on 25 Jul 2008 at 8.00am (UK)
Related stories
Optical probes check moulding materials in process
Sapphire window optical process probes fit into standard transducer ports on extruders, injection moulding machines o allow on-line spectroscopic analysis of a wide range of materials.
This compact, reliable and cost-effective instrument may be programmed to produce on-line reports, daily reports and historical reports.
It has an LCD display and a built-in printer with 8 dots per mm resolution, takes a standard paper roll up to 58mm width, and is mounted in a DIN-standard 96 x 96 mm panel-mounting housing.
The DR100A expansion module may be surface or DIN-rail mounted, and is linked to the PR100A via an integral RS485 connection.
The units are overload protected and carry a 12 months manufacturer's warranty. Request a free brochure from Celsum Technologies ...
• Celsum Technologies: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
