Product category:
Drives, motors and power transmission, couplings, clutches
News Release from: Curtis Instruments (UK) | Subject: PM motors/linear actuators controller
Edited by the Manufacturingtalk Editorial
Team on 16 June 2006
Controllers ensure longer motor and
actuator life
Full quadrant 24V DC fully sealed microprocessor-based controllers provide careful control in order to give long life and reliability to small permanent magnet or linear actuators.
Small PM motors or linear actuators need careful control in order to give long life and reliability The new remedy is from Curtis Instruments - a world leader in DC control systems - and pleased to reveal two tiny solutions with the launch of the 1211 and the 1224 microprocessor based MOSFET controllers
This article was originally published on Manufacturingtalk on 28 May 2007 at 8.00am (UK)
Related stories
Battery gauges and chargers for long life
Manufacturer of battery gauges and chargers, Curtis Instruments, can advise customers on the best ways of monitoring and maintaining batteries.
The 1211 is a full quadrant 24V DC fully sealed unit that can supply up to 25A peak current.
If that is too much power then simply plug in to your PC (with the Curtis 1314 interface kit) and adjust the programmable parameters.
Besides current limit, maximum speed, acceleration and braking rates are all adjustable.
Installation is made simple with a two bolt fix and pre-attached cables with connectors to reduce assembly time.
Model 1224 is a 12V unit offering single direction control.
However it can still deliver up to 40Amps peak and exceeds ISO7176 requirements The 1224 also has a rugged metal enclosure (IP54), and boasts notable features such as power save, HPD and reverse supply protection.
• Curtis Instruments (UK): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
