Product category:
Measurement and Quality Software and SPC
News Release from: Delcam | Subject: PowerINSPECT inspection software
Edited by the Manufacturingtalk Editorial
Team on 21 September 2006
Inspection software is universal
Inspection software is completely hardware independent, allowing companies with a variety of inspection devices to use the same software on all their equipment.
Delcam will demonstrate its PowerINSPECT inspection software at the GTMA Measurement Matters event to be held at the UK's Aston Villa Football Club on 10th October PowerINSPECT is already firmly established as the world's leading hardware-independent inspection software in the market for the inspection of prototypes, components and tooling against CAD data
This article was originally published on Manufacturingtalk on 5 Feb 2007 at 8.00am (UK)
Related stories
Inspection software with portable CMM
A portable CMM and Delcam's PowerINSPECT inspection software allowed Townley Engineering and Manufacturing Co from Candler, Florida, to turn a quality problem into a competitive advantage.
CAD inspection software compatible with AIMS
Delcam has released a version of its Powerinspect inspection software that will be compatible with the AIMS Metrology System used by leading aerospace companies, such as Boeing and Lockheed Martin.
PowerINSPECT offers three main advantages over competing software.
Firstly, it is completely hardware independent, allowing companies with a variety of inspection devices to use the same software on all their equipment.
This makes it easier for staff to use the company's different devices and allows all reports to be produced in the same format.
Further reading
PowerINSPECT to inspect nuclear-fusion machine
Delcam's PowerINSPECT inspection software is playing a vital role in the construction of a nuclear-fusion machine.
New software versions at QM show
Delcam will launch three new versions of its PowerINSPECT inspection software at the Quality in Manufacturing Exhibition to be held at the Motorcycle Museum, Birmingham on 15th and 16th June.
Software proves a good fit for General Motors
Delcam's PowerInspect inspection software has proved to be a good fit with the quality control requirements at leading automotive company, General Motors.
Secondly, it can meet all the different inspection needs, including checking of geometric features, sections and edges, as well as surfaces.
Thirdly, the software is extremely flexible.
Reports with pictorial, graphical and tabulated data can be produced to recognised international standards or in any customer-specified format.
This flexibility ensures that the resulting reports can be easily understood by everyone involved in collecting or analysing inspection data.
The latest release of PowerINSPECT program incorporates collision detection, an enhanced Geometric Explorer, additional best-fit options for analysing the results, and improvements to the software's already industry-leading graphics and report generation.
The new collision detection functionality is based on that used for gouge prevention and collision detection in Delcam's PowerMILL CAM software.
As the inspection sequence is being developed, the software provides protection against stylus and probe collisions by flagging a warning if any move between measurement points will violate the part being inspected.
When the routine is completed, a more comprehensive check of the whole sequence can be undertaken with a simulation on a computer model of either a co-ordinate measuring machine or a machine tool operating on-machine verification.
The new Geometric Explorer, which is now fully integrated within PowerINSPECT, makes it easier to extract nominal data from CAD models.
More detailed information can now be extracted about the geometry and placed into the sequence tree of operations.
Previous versions of PowerINSPECT only operated best fitting of data based on 'least-squares' averaging.
The additional options will offer maximum or minimum material conditions to ensure the measured data is always either inside or outside the nominal CAD model.
Similarly, the collected data can be forced to lie within a minimum and maximum tolerance band from the nominal data.
The new options will be especially useful for scrap-or-save decisions carried out on damaged parts using on-machine verification.
The improved graphics result from the ability to store view orientations within the sequence tree of operations.
This allows the software to move immediately to the correct orientation relative to the model when taking measurements and removes the need for manual adjustment of the view.
Other information can also be stored in the sequence tree, such as text, graphics or even videos, so making it easier for offline programmers to explain the inspection sequence to the operator.
One of PowerINSPECT's most important attributes has always been the clarity of its reports.
This is being further improved with the addition of an HTML template editor that makes it much easier to create customised reports.
This can be used, for example, to establish a series of different templates so that each of the company's customers can have their reports in a specific format. Request a free brochure from Delcam ...
• Delcam: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
