Click on the advert above to visit the company web site

Product category: Software, off-line programming, CAM, for metal cutting machine tools
News Release from: Delcam | Subject: PowerSHAPE CAD software and PowerMILL CAM
Edited by the Manufacturingtalk Editorial Team on 21 December 2006

CAD/CAM change speeds up toolmaking

CAD and CAM system change has given a Dutch toolmaker a big advantage over its competitors as it can now import CAD data quicker and produce cutting tool paths faster.

Switching to Delcam's PowerSHAPE CAD software and PowerMILL CAM system has given Dutch toolmaker, FlexMax International Tooling, a big advantage over its competitors The software has made it easier to import data, and quicker to create tooling designs and the toolpaths to cut them

FlexMax is a toolmaker with some 40 employees, located in Venray in the Netherlands.

The company makes the complete range of progressive press tools, including cutting, bending and drawing tools, as well as dies.

FlexMax works mainly for automotive industry customers like BMW, Daimler-Benz, Ford, Volkswagen, Volvo and Opel, but it also has clients in other sectors, such as the office furniture and packaging industries.

While FlexMax had used CADCAM for some years, it had had regular difficulties with importing IGES files.

Sometimes the surfaces were so damaged that the software just crashed during importing.

"It took hours to get surfaces correctly imported into our previous software," remembered plant manager, Frank Hubers.

"We also needed better capabilities to design free-form surfaces when we had to re-design the component model to give the tooling design," he added.

"Then, we wanted to develop better cutting strategies, in a quick and flexible way." For the benchmark, Mr.Hubers selected software at three price levels - a 'high-end' system, a budget software and the Delcam programs.

"The 'high-end' software was a total disaster on the free-form surfaces," he recalled.

"We gave an example of our work to the company's "specialist CAD designer.

After one and a half hours sweating, he was totally confused and couldn't get any further.

Then, the 'specialist CAM demonstrator' couldn't produce the cutting paths we were asking for." Hubers said: "Next, we tried a cheaper system.

The operator couldn't produce the smooth surfaces we needed to blend from one section of the model to another and the flexibility of the toolpaths was way below what we wanted.

Post-processing the files took far too long on both systems." He said: "The Delcam demonstration was a complete contrast> We took an IGES file of a BMW part with us for the test.

Importing the data was no problem; it was done successfully in a moment"." Hubers added: "The smooth surface that had proved so difficult in the other software was created within a minute.

The demonstrator then suggested other solutions and convinced us of the power and the flexibility of the system.

Then, we took the part into PowerMILL and created all the roughing and finishing paths we needed within 45 minutes.

Also, the post-processing was done in seconds." Since working with the software, FlexMax has had no more problems in importing data or creating the surfaces it needs.

"We can generate all the toolpaths for virtually any of our work within 45 minutes, including the post-processing time," said Hubers. Request a free brochure from Delcam ...

"For Flexmax, Delcam software has been the right decision and has given us a big advantage against our competitors.".

• Delcam: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page

Search the Pro-Talk network of sites