Product category:
Mould and die making, machining, CAD/CAM, software
News Release from: DMS Diemould Service | Subject: Pipe plug water diverters for moulds
Edited by the Manufacturingtalk Editorial
Team on 01 November 2005
Die pipe plug water diverters install
easily
Pipe plug water diverters for moulds and dies are pre-assembled to their stainless steel rods and swivel to provide positive installation and removal.
The pipe plugs are pre-assembled to the stainless steel rods and swivel to provide positive installation and removal The rods are easy to install, requiring no special tools - simply lock the diverters in position on the stainless rod and install into the cooling channel
This article was originally published on Manufacturingtalk on 10 Jun 2005 at 8.00am (UK)
Related stories
Mould cycle counter checks lifetime condition
DMS has announced the UK availability of a new mould cycle counter that provides moulders with a mould monitoring and maintenance planning aid.
The rod stays in the centre of the cooling channel, allowing the maximum heat transfer to the coolant.
In addition to their ease of installation, an additional benefit of the pipe plug diverters is that, should a blockage occur in the cooling channel, the rod and plugs can be removed complete and then, after the blockage is removed, the rod and plugs can be reinstalled Manufactured from brass and stainless steels, the units will not rust.
The plugs are manufactured to the BSPT standard in 1/8in, 1/4in and 3/8in sizes and the plugs are manufactured as metric sizes, 8mm, 10mm and 12mm.
Rods are available in a variety of sizes, and appropriate diverters - including locking screws - can be ordered in any quantity.
• DMS Diemould Service: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
