Product category:
CNC plasma-arc and oxy-fuel gas cutting/profiling machines
News Release from: ESAB Cutting Systems | Subject: M3 plasma cutting machine
Edited by the Manufacturingtalk Editorial
Team on 01 November 2005
Switch easily for different plasma-arc
cut options
Depending on whether one wants to produce a fine quality plasma-arc cut or cut the plate as quickly as possible, it is easy to switch from one quality level option to the other.
With Esab Automation's new highly versatile M3 plasma cutting machine, users can switch easily between the cutting modes: Quality and Production It is easy to switch from one mode to another using the M3 CNC controller's cutting database, allowing adaptation to changing cutting requirements
This article was originally published on Manufacturingtalk on 11 Feb 2002 at 8.00am (UK)
Related stories
Waterjet profiles and cuts rapidly
A CNC waterjet cutting machine is helping aUK fabricator to achieve a much faster turnaround on the profiles and fabrications.
It can cut materials 1mm - 50mm thick and companies investing initially in a lower power machines have the option to upgrade at a later date to a higher power source instead of investing in a completely new machine.
Where high quality cutting is needed, the Quality mode of the M3 combines fast cutting speeds with high accuracy and a low cut angle (less than 2 deg).
This means dross free cuts with sharp top edges.
For faster throughput, users then can switch easily to the Production mode for high speed cutting up to 35m/min yet still achieving good quality cuts with a cut angle of less than 3.5 deg.
This M3 is ideal for plasma cutting all conductive materials including mild and stainless steel.
Marking can also be undertaken. Request a free brochure from ESAB Cutting Systems ...
• ESAB Cutting Systems: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
