Latest news on Manufacturingtalk categorised by supplier
Euchner (UK)
Please note: More news from Euchner (UK) on the Engineeringtalk web site
Address:
Unit 2 Petre Drive
Sheffield
S4 7PZ
UK
Telephone: (UK) +44 114 256 0123
http://www.euchner.com
Our RSS feed for news from Euchner (UK)
Request to receive our free email newsletter each week
Listing of all 21 news releases from Euchner (UK):
Safety enabling switch is lightweight, ergonomic
Euchner said that its ZSM enabling switch features a modern, modular, lightweight and ergonomic design, which makes it suitable for many different control and safety related functions.
News from Euchner (UK) (12 May 2008)
Twin-headed switches for two adjacent machines
The latest developments from the safety specialists include twin-headed switches designed for use with two adjacent machine access or cell enclosure guards.
News from Euchner (UK) (10 December 2007)
Switch monitors several machine guards at once
A non-contact safety switch allows the simultaneous monitoring of several safety guards and up to 20 devices can be included in one switch chain.
News from Euchner (UK) (15 November 2007)
Enabling safety switch has bus support
Among a range of safety switches with bus support is an enabling switch with two additional buttons that can be programmed and the switch is very economical on scarce address space.
News from Euchner (UK) (11 May 2006)
Non-contact guard locking introduced
A proven transponder-based safety switch with solenoid is now also available with monitored guard locking and the switch is suitable for safety category 4 applications.
News from Euchner (UK) (11 May 2006)
Keypad can be configured flexibly
Latest addition to a family of keypads has 14 freely configurable keys including LEDs and symbols and function can be applied to these keys as required using printed slide-in strips.
News from Euchner (UK) (11 May 2006)
Modular safety relay eliminates programming
Modular safety relay 'fills the gap' between simple safety relays and safety PLCs and eliminates programming - making them the simplest to install.
News from Euchner (UK) (19 October 2005)
Tamper resistant hinge is also a safety switch
Safety hinge with integrated safety function in a sturdy die-cast housing, is designed specifically for applications requiring robustness and small dimensions.
News from Euchner (UK) (17 October 2005)
Compact safety switch has high-force option
Compact safety switch for guard locking can accommodate higher operating forces of up to 2000N and can be supplied with plastics or metal encapsulated actuating heads.
News from Euchner (UK) ( 9 September 2005)
Safety switches approved for ATEX applications
Flexibility is essential for all users of ATEX-approved safety switches, and the latest offer option of three possible cable entry positions to ensure that switch location is made extremely easy.
News from Euchner (UK) (20 July 2005)
Enabling switches avoid machine frustration
Enabling switches for the safe AS-Interface bus can be combined to meet the requirements of all governing standards and avoid frustrations caused by machine operation only when guards are closed.
News from Euchner (UK) (26 October 2004)
Bus-compatible safety systems replace wiring
Conventionally (parallel) wired safety systems are replaced with bus-compatible safety systems on the AS-Interface bus and all diagnostic lines directly connected to the controller are eliminated.
News from Euchner (UK) (24 September 2004)
Safety switches suit rigorous production usage
Two safety switches are designed as the counterpart of the 'tried and tested' TP plastic housing safety switch and employs the same actuation head and actuator.
News from Euchner (UK) (18 August 2004)
Safety switch can be used at high locking forces
Safety switch for use in machine tools or other applications can be confidently used where locking forces up to 2500N are required and is protection rated to IP67.
News from Euchner (UK) (26 July 2004)
Non-contact safety switches protect surely
Non-contact safety switches provide a high degree of protection for operators in areas where cleaning or contamination are notable factors.
News from Euchner (UK) ( 3 October 2003)
Hazardous functions switched off
Safety relays that can serve fields of application up to category 4, EN954-1, will dependably break electrical control circuits and therefore switch off any potentially hazardous machine functions.
News from Euchner (UK) (30 July 2003)
Achieve optimum safety-at-work conditions
Upgraded AS - Interface Bus system uses TZ and TP safety switches to provide guard locking with direct access to AS - Interface and create the optimum safety-at-work operating conditions.
News from Euchner (UK) ( 8 May 2003)
Inductive and capacitive sensors in full
A 100 page full colour brochure includes general specifications of Euchner inductive and capacitive sensors and their connectors, together with advice on optimum conditions for use of each switch
News from Euchner (UK) (18 November 2002)
Modern bus technology reduces safety switch wiring
A simplified safety switch wiring incorporates modern bus technology has reduced the complexity of wiring control for category 3 or 4 safety switches.
News from Euchner (UK) (16 September 2002)
The key to accessing IT system is electronic
The security of company IT systems is being revolutionised by the electronic key system, which allows access to PCs and control systems without the need for passwords.
News from Euchner (UK) (14 August 2002)
Transponder switches will replace magnetic types
