Product category:
Pumps and valves
News Release from: Elesa (UK) | Subject: Valve knob
Edited by the Manufacturingtalk Editorial
Team on 25 July 2006
Knob fits onto square shaft without
drilling
The ubiquitous valve knob with a fast fit snap fixing variant, which allows the knob to be pushed on and is retained by a SS spring clip, which locates in a groove machined in the shaft.
Now from Elesa (UK) - the ubiquitous valve knob with updated patented fast fit snap fixing variant, which allows the knob to be pushed on and is retained by a stainless steel spring clip, which locates in a groove machined in the shaft This means that the customer does not have to drill and tap the end of the square shaft
This article was originally published on Manufacturingtalk on 7 May 2003 at 8.00am (UK)
Related stories
Valve knob design updated
Stylish 5 lobe design in black technopolymer incorporating a square drive and a variety of coloured cap possibilities feature an updated valve knob.
It also eliminates the time taken fitting the retention screw.
The knob simply pushes on but requires a screwdriver for removal.
Elesa's stylish five-lobe design in black technopolymer also has standard square drive fitment involving use of a nut or screw to secure the knob, so cover caps in black, red, blue, orange, grey or yellow provide a nice aesthetic touch.
VCRT square drive knobs have a blended radius five-lobe design with well-proportioned rim height to assure a natural safe and comfortable grip.
Manual operation of valve actuator mechanisms, e g, for hydraulic equipment, is made easier by the VCRT lobe knob which is available in sizes from 40mm to 63mm diameter. Request a free brochure from Elesa (UK) ...
• Elesa (UK): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
