Product category:
Automation and assembly equipment
News Release from: Elscint Automation | Subject: Vibratory Part Feeder
Edited by the Manufacturingtalk Editorial
Team on 05 November 2003
Vibratory feeder delivers 'heads up' at
high speed
Vibratory part feeder feeds rivets and screws 'heads up' at a very high speed without using compressed air for orientation and removal of components nor does it require a sensor.
Elscint Automation, a leading vibratory parts feeder manufacturer has developed a Vibratory Part Feeder to feed rivets and screws at a very high speed Such components are required to be fed 'head up'
This article was originally published on Manufacturingtalk on 6 Dec 2002 at 8.00am (UK)
Related stories
Stacking machine developed for bearing parts
Useful for stacking items like bearings cages/bearing washers and such other components the stacking machine is for automatically feeding components into a vibratory bowl feeder.
The orientation is usually done on a slot.
Though this method is good for orientation, it reduces the speed of operation and requires usage of compressed air for increasing the feed rate and removal of unoriented rivets / screws and also requires a sensor for stopping the vibratory parts feeder when the chute is full.
The Vibratory Parts Feeder developed by Elscint Automation not only achieves a very high speed or feed rate but also does away with the usage of compressed air for orientation and removal of component as also the sensor.
Either of the five Models of Elscint Vibratory Parts Feeders can be used for this purpose depending upon the size and loading capacity required.
This unit has a lot of applications in varied industries.
However, this is possible when a tubular output is required.
• Elscint Automation: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
