Product category:
Automation and assembly equipment
News Release from: Elscint Automation | Subject: Elscint Spring Disentangler
Edited by the Manufacturingtalk Editorial
Team on 10 December 2003
Disentangler feeds out springs at up to
200/min
Small pressure springs are a tiny but vital part in numerous modern products and disentangling and feeding can be a problem, solved now by a disentangler that feeds up to 200 springs/min.
Small pressure springs are a tiny but vital part in numerous modern products In fact, one of the most time consuming techniques is the handling of small components such as springs
This article was originally published on Manufacturingtalk on 23 Mar 2004 at 8.00am (UK)
Related stories
Spring In to Action
The Elscint Spring Disentangler feeds out the Springs through tubes to the point of use with an output of up to 200 springs per minute.
Not only are they usually supplied in a tangled mass, from which they need to be freed, but they are also difficult to pick up and fix into position.
It is very important that the feeding and location of the springs is extremely accurate during assembly.
Elscint manufactures the Elscint Spring Disentangler for disentangling of various types of springs.
This finds usage in all industries where springs are used.
The Elscint Spring Disentangler feeds out the springs through tubes to the point of use.
Various types of springs can be used in the same Unit with slight change over tooling.
Capacity and separation rate depends on the shape and size of the springs.
An output of up to 200 springs per minute can be achieved through each feeder tube! Elscint also offers other accessories like Hand Pick Off, Escapement etc.
to go with this equipment.
• Elscint Automation: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
