Vibratory bowl feeders manage bearing needles

A special vibratory bowl feeder for feeding of needles upto dia 6mm diameter and 50mm long has changeover tooling set is provided which makes it possible to feed any size of needle.

Elscint Automation, the ISO 9001:2000 certified leading vibratory parts feeder manufacturer (having CE Marking for its parts feeders) from India manufactures a Special Vibratory Bowl Feeder for feeding of Needles upto dia 6mm.

A special cast aluminium bowl having less track width is mounted on the Elscint vibratory drive unit Model 250.

An Elscint changeover tooling set is provided which makes it possible to feed any size of Needle upto dia 6mm in this bowl.

The Elscint changeover tooling set helps changeover from one size to another very fast and convenient.

Lengths of needles that can be fed through this parts feeder can go upto 50mm.

A very high speed can be achieved with this vibratory bowl feeder.

Speeds upto 8m/min (800 pieces/min for 10mm length needles) can be achieved very easily.

Polyurethane tubes for each size are provided so that the needles can be used wherever required.

Alternatively, spring tubes can also be offered.

The cast aluminium bowl is lined with Elscinthane Polyurethane Spray Bowl Lining which helps the needles to be fed properly.

The Elscinthane Lining is given a very smooth finish for increasing the feeding speed.

As the Elscinthane Lining has very high shore hardness, it increases the life of the bowl tremendously.

An Elscint silo is provided as an optional accessory to increase the loading capacity of the bowl.

The standard Elscint silo has a capacity of 8 litres by volume.

This increases the bowl capacity tremendously and reduces the frequency of loading of components into the feeder bowl.

The silo is also lined with Elscinthane Polyurethane Lining to increase its life and improve its performance.

There is a cast aluminium dome placed on the bowl which rotates in the same direction as the bowl, further increasing the speed of the feeder.

The silo also rotates along with the dome, thereby eliminating jamming / bridging of needles inside the silo.

The Elscint Vibrator Model 250 is available with a unique 'Elscint Chute Plate' design.

If the dome is manually removed, the needles fall into the bowl centre and can be collected outside due to the chute plate' design.

This vibratory bowl feeder adds tremendous value for needle manufacturers and helps improve their productivity.

It being a standard vibratory bowl feeder, it is kept in stock and can be provided immediately.

All needle bearing Manufacturers in India and even some in Europe are now standardising on the 'Elscint Needle Feeding Vibratory Bowl Feeder'.

Back to top