Vibratory Weld Nut/Bolt Feeder

Elscint Automation manufactures a Nut Feeding Accessory for Resistance Spot Welding Machines.

Elscint Automation manufactures a Nut Feeding Accessory for Resistance Spot Welding Machines.

This consists of a Elscint Vibratory Bowl Feeder which feeds the Nuts (these can be either Square Nuts or Round Nuts).

The Nuts are fed to a Pnuematic Pusher and then to an Escapement, which places the Nut on the Work Station for Spot Welding.

It is then held at that position through Magnetic Property.

All these arrangements can be provided by Elscint Automation.

This reduces the manual intervention required for feeding and placing of the Nuts.

Either of Elscint Vibratory Parts Feeder Model 160 or Model 250 or Model 400 can be used for this purpose depending upon the size of the Nut to be fed and the loading capacity required.

This accessory is very popular with Spot Welding Machine Manufacturers all over the world.

This is mainly used for Nuts of size M8, M10 and M12.

The speed which can be achieved is a minimum of 20 to 30 Pcs per minute for M 8 Square Nut.

The speed of other sizes will vary accordingly The Elscint Nut Feeder thus consists of three major attachments, i.e the Main Body, Escapement and Feeding head.

These are controlled electrically and nuts are fed to the lower electrode of a spot welder.

The special features of the feeding head which is the most important unit of the Elscint Nut Feeder are its method of feeding nuts and its construction.

Back to top