Product category:
Bar feeders and loaders
News Release from: EMCO Maier | Subject: LM800 and LM1200 short bar loading magazines
Edited by the Manufacturingtalk Editorial
Team on 18 November 2003
Short bar loading magazine saves space
The space a machine needs is becoming more and more an issue, which is why short bar loading magazines have been developed to save on space and shorten loading times.
The space a machine needs is becoming more and more an issue That is why Emco has developed the most compact short loaders available on the market today: the Emco LM800 and the Emco LM1200
This article was originally published on Manufacturingtalk on 18 Nov 2003 at 8.00am (UK)
Related stories
Turning hardware, software solutions revised
Not only a new name for a modular training system, 'Emco Concept' stands for extensive improvements made to the existing hardware and software solutions for turning machine operation.
These loaders are the ideal solution for automatic feeding and reloading cut bars.
The benefit: little floor space required and short loading times thanks to shorter travel distances.
The loaders are available for the machines ET 325-II, ET 332 and ET 345-II (LM800), as well as for the ET 365 and the Hyperturn 645/665 (LM 1200).
The same FANUC control unit is used in both loaders, so the operation and programming of the machines is identical.
A bar loading cycle integrated into the machine control unit simplifies the application.
The use of plastic reducing bushes ensures the perfect guidance of the raw material, so the machine can be run at high speeds without restriction.
Residue is disposed of through the working area as on other short bar loaders.
Using a selection parameter in the loading cycle, residue disposal can be effected via the shaving feeder, the collecting basin or the counter spindle.
• EMCO Maier: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
