Product category:
Machine and production line ancillaries, miscellaneous equipment
News Release from: Emka UK | Subject: EMKA 1180 Elegance swing handles
Edited by the Manufacturingtalk Editorial
Team on 01 March 2005
Swing handles mounted inside or out
Following the trend for locks and handles to be mounted either outside the gasketed area or inside, a narrow swing handle accepts continuous flat rods or multi-part types.
The EMKA 1180 Elegance programme comes from a stable renowned for its quality and initiative - this is true also for the 1180 IP65 protection and options for swing handle with added lock protection or for lock with escutcheon, make this a notable addition to the cabinet designers' workbox of lock and handle solutions
This article was originally published on Manufacturingtalk on 31 Aug 2001 at 8.00am (UK)
Related stories
Latches allow rapid panel fitting
EMKA, aware as ever of the needs of specialist rack manufacturers, have introduced the 1091 range of attractive slide latches, ideally suited to rapid panel fitment.
Following the trend initiated by EMKA for locks and handles to be mounted either outside the gasketed area or inside, the 1180 is narrow (36mm) and will accept quick-fit continuous flat rods or multi-part types.
Both the escutcheon plate and the swing handle can accept a wide range of key types, while the swing handle is particularly suited to profile cylinders by virtue of its added dust and water protection.
This is achieved by a sliding over-cover, which also enhances the aesthetics of the unit.
Further information on EMKA products may be found at: www.emka.co.uk, where it is also possible to download any part or the entire EMKA product catalogue. Request a free brochure from Emka UK ...
• Emka UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
