Product category:
Food and drink manufacturing: processing equipment
News Release from: E-Components and Chains | Subject: Metal detectable plastics pens
Edited by the Manufacturingtalk Editorial
Team on 03 January 2006
Coloured plastics pens are metal
detectable
The smallest particles in metal detectable plastics pens, offered in four hygiene colours housings of blue, red, green and yellow, are detectable and rejectable.
E-Components and Chains of Pocklington UK are pleased to announce the launch of their Detectamet Metal Detectable Plastic Pens in the four hygiene colours housings of blue, red, green and yellow The only Metal Detectable plastic pens available manufactured from a specially formulated material based on high impact, food contact approved plastic
This article was originally published on Manufacturingtalk on 7 Jul 2004 at 8.00am (UK)
Related stories
Worn conveyor wearbend sections repaired readily
No longer does the user have to replace the whole corner wearbend section of a conveyor system when wear is evident as worn areas can be repaired using a ceramic filled grade of plastics.
Treads reduce slips and falls in the work place
Made from isophthalic resin that is corrosion resistant, fire resistant and extremely hard wearing a range of tread plates can be fitted over the top of existing stair treads.
Even the smallest of Particles are detectable and rejectable The Detectamet Pens other benefits include: * Available in Retractable and Non-Retractable styles.
* X-ray visible.
* Prevents damage to delicate and expensive equipment.
* Cost effective against other materials.
* Tough and durable.
* Minimum parts.
* Retractable nib.
* Available in blue, red and black ink options.
* Reinforced clip for security purposes which also incorporates a hole to locate a 20mm split ring and safety chain as recommended.
* User friendly sleek, streamline design.
* The plastics material with the carefully formulated additive has been approved for direct food contact under EU90-128 (FDA Approved).
* Detectamet Pens can be used as part of Hazard Analysis Critical Control Point.
* Detectamet Pens are detectable and rejectable by metal detection systems used throughout the food and pharmaceutical Industries.
* Subject to a modest tooling charge and a minimum order quantity ECC are able to incorporate a company logo/corporate identity on the pens should this be required.
• E-Components and Chains: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
