Product category:
Environmental contamination, noise, dust and fume extraction, sensors
News Release from: E-Components and Chains | Subject: Detectamet metal-detectable plastic tray
Edited by the Manufacturingtalk Editorial
Team on 14 February 2006
Detectamet plastic trays are
metal-detectable
E-Components and Chains (ECC) is launching a Detectamet metal-detectable plastic tray available in the four hygiene colour housings of blue, red, green and yellow.
E-Components and Chains (ECC) is launching a Detectamet metal-detectable plastic tray available in the four hygiene colour housings of blue, red, green and yellow Designed for the food and pharmaceutical industries the Detectamet tray measures 285mm long x 230mm wide x 50mm deep and weighs only 240g
This article was originally published on Manufacturingtalk on 7 Jul 2004 at 8.00am (UK)
Related stories
Worn conveyor wearbend sections repaired readily
No longer does the user have to replace the whole corner wearbend section of a conveyor system when wear is evident as worn areas can be repaired using a ceramic filled grade of plastics.
Treads reduce slips and falls in the work place
Made from isophthalic resin that is corrosion resistant, fire resistant and extremely hard wearing a range of tread plates can be fitted over the top of existing stair treads.
The only Metal Detectable plastic tray available manufactured from a specially formulated material based on high impact, food contact approved plastic.
Even the smallest of particles is detectable and rejectable.
The Detectamet tray benefits include: X-ray visible; good chemical resistance; prevents damage to delicate and expensive equipment; will withstand temperatures from -30C to +80C; cost-effective against other materials; tough and durable; minimum parts; lightweight (240g); available in blue, red, green and yellow; the plastic material with the carefully formulated additive has been approved for direct food contact under EU90-128 (FDA-approved); Detectamet trays can be used as part of hazard analysis critical control point (HACCP); Detectamet trays are detectable and rejectable by metal detection systems used throughout the food and pharmaceutical industries; and, subject to a modest tooling charge and a minimum order quantity, ECC is able to incorporate a company logo/corporate identity on the trays should this be required.
For more information please contact E-Components and Chains.
• E-Components and Chains: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
