Product category:
Electrical systems
News Release from: E-T-A Circuit Breakers | Subject: ESS20 electronic circuit breaker
Edited by the Manufacturingtalk Editorial
Team on 16 April 2003
Circuit breaker selectively protects
circuits
Novel electronic, rail-mounted circuit breaker selectively protects individual component circuits powered by SMPS and maintains productivity in manufacturing plants.
E-T-A Circuit Breakers has introduced a new electronic circuit breaker designed to selectively protect individual component circuits powered from single switch-mode power supplies (SMPS) Easily added to a DIN/EN rail, the new ESS20 provides advanced circuit protection for components used in factory automation systems, including sensors, actuators, field bus couplers and controls
This article was originally published on Manufacturingtalk on 5 Feb 2001 at 8.00am (UK)
Related stories
E-T-A Offers Electrical Circuit Protection
E-T-A Circuit Breakers is producing a wide range of ultra-reliable circuit breakers equipment (CBEs) and a range of sub-racks and other power distribution systems.
Circuit breaker protects production
E-T-A Electronic Circuit Breakers avoids costly production line down-times. They offer selective disconnection of load circuits attached to switched-mode power supplies.
The E-T-A ESS20 Electronic Circuit Breaker solves a serious problem affecting manufacturing lines and processes powered by 24V DC switch-mode power supplies.
Without the ESS20, an overload in a single circuit will cause a power supply to shut down the output to all the circuits it supplies.
On recovery it may go into 'hiccup' mode.
Further reading
Miniature switch/CBE offered for process control
combined switch functionality features a miniaturised plug-in circuit breaker, which is designed to reduce downtime in process control and automation applications.
Circuit breaker systems can be customised
A detailed shortform brochure outlines the standard and customised circuit breaker system solutions for procdess control, factory automation and communication systems.
Costly downtime, scrap and even danger to personnel may result.
The ESS20 physically isolates single faulty outputs, while allowing all other load circuits connected to the same SMPS to continue working as normal.
It is designed to limit the prospective load current to a maximum of 1.8 times the rated current and rapidly disconnects the output in the event of an overload or short circuit.
For optimum adjustment to the particular application, the current rating of the ESS20 is switch selectable for 3A or 6A.
An LED, and integral auxiliary contacts, provide status and failure indication for visual verification and as a signal to a logic controller or factory software.
An On/Off button also enables manual isolation of the load circuit.
Utilising Electronic Circuit Breakers type ESS20, it is possible to design highly efficient, cost-effective manufacturing equipment and complex industrial lines.
Under worst-case failure conditions, the fault current will always be limited to a minimum value, the rest of the system will remain in operation, and power can be quickly restored once the faulty output circuit has been corrected.
This guarantees maximum efficiency and productivity of the entire process.
The ESS20 is a further addition to E-T-A's product family of electronic circuit breakers.
It has a width of only 12.5mm and is designed to be plugged directly into an E-T-A power distribution socket, Module 17plus, which is mountable on a DIN/EN rail.
All electrical connections are made by means of convenient screwless terminals.
Traditional protection solutions do not provide the answer.
Circuit breakers with fast operating characteristics would be likely to cause nuisance trips during current peaks, and capacitive loads such as sensors and interfaces could not be reset.
On the other hand, neither delayed operation nor high performance circuit breakers will respond adequately in this situation to overcurrents.
The power supply will therefore switch off completely, bringing all connected loads, i.e the entire system, to a standstill. Request a free brochure from E-T-A Circuit Breakers ...
• E-T-A Circuit Breakers: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
