Product category:
Adhesives and adhesive bonding equipment
News Release from: Eurobond Adhesives | Subject: UV and heat curing epoxy resin Glob Top
Edited by the Manufacturingtalk Editorial
Team on 31 October 2006
UV and heat curing epoxy resin
introduced
UV and heat curing epoxy resin Glob Top has high ionic purity and demonstrates extreme temperature resistance between -40 deg C/+180 deg C and cures in just 2 min under UV.
Vitralit 1691 is a new UV and heat curing epoxy resin Glob Top available from Eurobond Adhesives This new addition to their range has high ionic purity and demonstrates extreme temperature resistance between -40 deg C/+180 deg C
This article was originally published on Manufacturingtalk on 5 Jan 2007 at 8.00am (UK)
Related stories
Structural adhesive is longer curing
A longer curing structural acrylic adhesive is a two-part rapid bonding adhesive designed to bond most plastics, composites, metals and wood in any combination.
Vitralit 1691 cures in just 2 min when exposed either to UV (UV-A 70mW/cmin2) or can be thermally cured when exposed to 110 deg C.
It has very low water absorption rates, typically 0.2% with very little shrinkage when cured.
Vitralit 1691 has fast UV-surface fixation and the subsequent short after-bake process with infrared radiation implies that there is no limit to the lamination strength.
Vitralit 1691 has a shelf life of six months when stored at 5 deg C with no exposure to UV-radiation.
* About Eurobond - Eurobond Adhesives are specialists in supplying adhesives and sealants to the electronics manufacturing industry.
Our range of products includes, glob tops, electrically conductive adhesives, thermally conductive adhesives, SMDs, conformal coatings and a unique flexible electrically conductive adhesives.
• Eurobond Adhesives: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
