Product category:
Pneumatic equipment
News Release from: Festo | Subject: CPX pneumatic valve terminals
Edited by the Manufacturingtalk Editorial
Team on 15 July 2002
Valve terminal has user-friendly
diagnostics
At the PPMA show at the NEC, the latest innovation in pneumatic valve terminals is based on a flexible electrical I/O concept with advanced user-friendly diagnostics.
Europe's leading pneumatics and automation company Festo, is actively participating in this year's PPMA show at the NEC They have selected the event to introduce the latest innovation in the expanding world of pneumatic Valve Terminals
This article was originally published on Manufacturingtalk on 13 Apr 2004 at 8.00am (UK)
Related stories
Festo Sponsors Engineering Skills
Festo has again sponsored the UK Skill Mechatronics competition. The triumphant winners were Sharleen Jackson and Dave Rowe of the Warrington Collegiate team.
Pneumatic equipment comprehensively catalogued
Festo has launched a customised new catalogue, entitled 'Premier Products and Services 2001', covering essential items from the entire Festo product range.
The new system (CPX) is based on a flexible electrical I/O concept with advanced user- friendly diagnostics.
Top of the bill on Festo Stand No.
6631 will be the new CPX offering a very cost-effective solution for distributed electrical input and outputs.
Further reading
Pneumatic solutions? Ask for an Expotainer visit
Festo's Expotainer containing demonstrations of innovative pneumatics brings benefits of exhibition attendance, without the drawbacks, direct to the workplace.
Cylinders offer zero rotation under torque
Automation specialist Festo has announced a new range of precision cylinders with integrated guides to offer zero rotation under torque loads and minimal deflection under lateral loads.
Valve Terminal specifically for the food industry
Festo is to participate in this year's PPMA exhibition and is launching a number of products, including its latest Valve Terminal designed specifically for the food industry
Being shown for the first time in the UK, the award winning system significantly extends the flexibility of valve terminals.
Claiming approximately 60% market share in this sector across Europe, Festo are keen to further extend their lead as rival manufacturers seek to introduce their 'me too' copies.
Jacqui Reid, Product Manager for Valve Terminals at Festo says "Whilst Festo have led the way on Valve Terminal hardware developments we are focusing this year on showing our latest developments in monitoring and diagnostic systems utilising the capabilities of a wide range of fieldbus systems".
She continues, "We are now seeing positive signs that Open fieldbus' are becoming the norm for packaging and processing machinery.
The user benefits in terms of reduced wiring and flexibility are acknowledged and are tangible cost savings.
Where a lot more progress can now be made is in using the functionality provided within the CPX system and within the bus systems.
Most importantly this provides transparency for more advanced monitoring of the status of remote I/O and the diagnostics to anticipate or quickly react to a failure and put it right with the absolute minimum disruption to throughput".
Festo will be demonstrating dynamic display models showing their full 'Wet End' product range, from stainless steel actuators to clean design valve islands and a complimentary range of accessories such as air preparation equipment, specialist tubings and fittings.
Food and Packaging Industry Manager for Festo, Steve Land, explains that the market in the UK for food and packaging machinery market is subtly different to the continent.
"With our higher penetration of supermarkets there is a greater use of pre-prepared and packaged goods, therefore the PPMA Show is an important international contact point for Festo to gauge opinions and market feedback to generate new ideas, helping to direct new research and developments".
The PPMA show is the ideal opportunity for Festo to show GB OEMs and End Users the latest in its specialist, dedicated range of products and services for the Food and Packaging industry.
Land continues, "It is equally important to demonstrate that we can support these products with technical advice, training and implementation packages such as full 3D drawing support.
The key issues for the End User are related to life-time costs, operating efficiency and compliance with HACCP guidelines.
Therefore we hope to exchange interesting ideas and solutions both with fellow exhibitors and end user visitors to the show".
The PPMA Show is being held at the NEC, Birmingham, UK, from 25-26th September.
Festo will be exhibiting on stand 6631. Request a free brochure from Festo ...
• Festo: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
