Product category:
Drives, motors and power transmission, couplings, clutches
News Release from: Festo | Subject: Festo DGEL electro-mechanical belt drive
Edited by the Manufacturingtalk Editorial
Team on 27 August 2004
Motion controller enhances cutting
performance
A touch-screen operated motion control system, linked to a servo-driven actuator, is enhancing the performance of a cutting machine employed by one of the UK's major fitted kitchen makers.
A touch-screen operated motion control system, linked to a servo-driven actuator, is enhancing the performance of a cutting machine employed by one of the country's major fitted kitchen makers The Symphony Group is the UK's second largest fitted furniture manufacturer, employing around 1,400 people manufacturing kitchen, bathroom and bedroom furniture in Leeds, Rotherham and Nottingham
This article was originally published on Manufacturingtalk on 13 Apr 2004 at 8.00am (UK)
Related stories
Festo Sponsors Engineering Skills
Festo has again sponsored the UK Skill Mechatronics competition. The triumphant winners were Sharleen Jackson and Dave Rowe of the Warrington Collegiate team.
Pneumatic equipment comprehensively catalogued
Festo has launched a customised new catalogue, entitled 'Premier Products and Services 2001', covering essential items from the entire Festo product range.
A major part of its business is the manufacture of fitted kitchen units, and within that process is the production of kitchen unit worktops.
The company's customers include the myriad of contract kitchen fitters and builders who need worktops manufactured to precise measurements.
The plant in Leeds produces some 600 worktops cut to size each day, a total of around 150,000 per year.
Further reading
Pneumatic solutions? Ask for an Expotainer visit
Festo's Expotainer containing demonstrations of innovative pneumatics brings benefits of exhibition attendance, without the drawbacks, direct to the workplace.
Cylinders offer zero rotation under torque
Automation specialist Festo has announced a new range of precision cylinders with integrated guides to offer zero rotation under torque loads and minimal deflection under lateral loads.
Valve Terminal specifically for the food industry
Festo is to participate in this year's PPMA exhibition and is launching a number of products, including its latest Valve Terminal designed specifically for the food industry
This workload had taken its toll on the company's cutting machine which had functioned for 10 years - operating at least two shifts per day for five days per week during this period.
"Quite simply, it had worn out," explains Ron Nolan, Works Engineer at Symphony in Leeds.
The original machine used a lead screw and stepper motor for its drive system, and maintained a positional accuracy of +/-0.1mm.
Symphony's objective was to replace the system with a faster machine that would match or exceed the reliability and accuracy of the original.
Steve Bell, Internal Development Engineer at Symphony who would be generating the software for the new system turned to Mitsubishi Electric, whose PLCs are widely used across the company's manufacturing sites.
As the new cutting machine required a long stroke, guided electro-mechanical axis, in turn Mitsubishi enlisted the assistance of Festo.
The collaborators recommended a 5 metre long electro-mechanical belt drive from the Festo DGEL family, coupled to a Mitsubishi servo motor and gearbox.
This combination provides the positioning axis with a considerably improved dynamic capability - stemming from the servo motor's higher torque and the linear actuator's low-friction roller-guide - speeding cutting cycles compared with the previous drive arrangement.
These axis components were assembled by Festo Engineering Services, with CR Solutions - a Mitsubishi systems integrator - providing the control equipment and expertise.
With Symphony's engineers requiring a detailed appraisal and understanding of the system before installation, the collaborating vendors took advantage of the Festo Applied Automation Centre in Northampton, and CR Solutions used it to present a working demonstration.
Impressed by the performance, and recognising the productivity benefits that the new machine would deliver, Symphony's Ron Nolan accepted the proposed integrated system solution.
The new machine features a Mitsubishi touch-screen human-machine-interface (HMI) that allows the operator to enter cross cut length information directly.
The system then automatically positions the workpiece and cuts to length.
Via Ethernet, the HMI links directly into Symphony's factory-wide IT network, delivering real-time manufacturing data for production planning as well as week-long trend monitoring, analysis and throughput efficiency statistics.
"The new machine meets our specifications and does indeed improve on the speed of the old system, while maintaining the 0.1mm accuracy we demand," says Nolan.
"Efficiency is everything to us.
We don't like to waste time or material resources; we even crush the sawn offcuts to fuel the factory heater.
Now the new cutting process makes better use of time, and we are delighted with the results," he adds.
A further development phase is already underway at Symphony to incorporate PLC units to control the infeed area.
This will, essentially, provide a closed loop manufacturing cycle for the worktop cutting, thereby improving the efficiency and throughput of the entire process. Request a free brochure from Festo ...
• Festo: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
