Product category:
Automation and assembly systems
News Release from: Festo | Subject: High speed automated assembly line
Edited by the Manufacturingtalk Editorial
Team on 28 September 2006
High speed automation system cost 50%
less
High speed automated line - representing GBP 1 million investment in turnkey automation - produces a thermostat capsule/12s and will pay for itself within 3.5 years, saving 50%.
Spirax Sarco is an excellent example of a UK manufacturing company competing on the global 'stage' To remain competitive and at the forefront of their market it invests heavily in automation
This article was originally published on Manufacturingtalk on 13 Apr 2004 at 8.00am (UK)
Related stories
Festo Sponsors Engineering Skills
Festo has again sponsored the UK Skill Mechatronics competition. The triumphant winners were Sharleen Jackson and Dave Rowe of the Warrington Collegiate team.
Pneumatic equipment comprehensively catalogued
Festo has launched a customised new catalogue, entitled 'Premier Products and Services 2001', covering essential items from the entire Festo product range.
The latest project to come on-stream is a fully automated cell producing BP99 thermostatic capsules, which are precision high-reliability components used in many of the company's steam traps.
The new line, which is based extensively on Festo automation equipment, is currently in the process of ramping-up production, and will shortly be switched in to replace the existing line completely.
Spirax Sarco undertook a strategic review of its capsule manufacturing capabilities, commissioning a number of feasibility studies and cost analyses.
Further reading
Pneumatic solutions? Ask for an Expotainer visit
Festo's Expotainer containing demonstrations of innovative pneumatics brings benefits of exhibition attendance, without the drawbacks, direct to the workplace.
Cylinders offer zero rotation under torque
Automation specialist Festo has announced a new range of precision cylinders with integrated guides to offer zero rotation under torque loads and minimal deflection under lateral loads.
Valve Terminal specifically for the food industry
Festo is to participate in this year's PPMA exhibition and is launching a number of products, including its latest Valve Terminal designed specifically for the food industry
Having worked closely with Festo since the installation of the original line more than 22 years ago Spirax Sarco knew the reliability they could expect.
Over a 20 year period the old production line has more than satisfied the considerable demand for capsules.
The vast majority of the Festo components are original and have not required replacement.
During the evaluation process, the company used its relationship with Festo to ensure it was abreast of the latest automation technology.
Spirax Sarco briefly considered sub contract manufacturing for its BP99 capsules, but quickly decided that this would not be viable due to the components' complexity.
Given the uniqueness of the capsules' design, the company also viewed the transfer of its core competency and intellectual property to the open market as potentially risky.
Replacing like-for-like production equipment was judged not to be a good idea because it would not offer any scope for increasing throughput, and would severely compromise long-term manufacturing flexibility.
The decision was therefore made to utilise the internal knowledge of the Spirax Sarco project engineers combined with external skills and resources from the Festo Customer Solutions team based in Northampton.
Consequently, over the last two years, Roger Fern, Spirax Sarco's Production Engineer in charge of the project, has designed and developed the replacement line, calling upon Festo to supply him with 3D CAD models as soon as he had defined the movement profiles required by each manufacturing cell on the line.
He found that this arrangement worked really well and is quoted as saying, "I found the Customer Solutions team, led by the Festo project manager, Ray Barnes, to be helpful in the extreme".
"It was often the case that I would simply send a few emails and maybe follow these up with a quick phone call, and then 10 to 15 minutes later I would receive the 3D model that I needed." In effect, Fern created a 'virtual' replacement line.
Once approved Festo then delivered the pre-assembled and tested handling modules for each cell, enabling a fully functional line to be implemented very quickly.
Furthermore, the new line would accommodate Spirax Sarco's new 32 bar BP99 capsules, whereas the existing line could only handle its earlier-generation 21 bar models.
Under Fern's direction, Festo managed the specification of the system and controls - overseeing the mechanical build, including the complete system documentation and on-site installation and commissioning.
The many control panels containing PLCs, operator interfaces and screens were programmed and commissioned on-site.
Festo liaised with external suppliers to integrate the controls and complete the master documentation.
The need for a replacement production line became more acute towards the end of 2005.
The production equipment was effectively nearing the end of its service life - needing up to seven operators to maintain critical production target levels.
Even more worryingly, the company was very aware that if obsolete equipment caused total line failure, it would impact heavily on customer service and sales.
The new production line was given the go-ahead at the beginning of last year.
It comprises 10 semi-autonomous manufacturing cells, linked by an SKF Flexlink conveyor system, with overall control handled by Allen Bradley PLCs.
In all, there are 16 pick and place units, each of which makes extensive use of Festo's handling range and fieldbus valve terminals.
The new production line has cost in the region of GBP 1 million - less than half that of the alternative quotes obtained from complete line builders within the UK and mainland Europe.
Spirax Sarco expects that its investment will be paid back within 3.5 years.
The line is currently undergoing final testing and qualification; it has already produced 50,000 capsules, and looks set to exceed all expectations.
According to Fern, "We are ironing-out a few minor bugs and confidently expect to achieve our production target very shortly, and then intend running the line four days a week, with Monday's set aside for component and line cleaning duties and routine preventative maintenance.
The new line only requires one full time and one part time operator, freeing up at least four operators to work on other production tasks, and has already demonstrated that it can achieve our new target production rate." * About Spirax Sarco - Spirax Sarco is the world's leading provider of steam control components and systems for industrial processes.
Part of the Spirax Sarco Engineering plc Group, which has been listed on the London Stock Exchange since 1959, the company is headquartered in Cheltenham, Gloucestershire and operates sales facilities in 90 countries worldwide.
www.SpiraxSarco.com.
* About Festo - Festo manufactures pneumatic and electrical components and systems for automating industrial processes.
The company has an annual turnover in excess of EUR 1.4 billion, and has facilities in 176 countries around the world.
Festo operates an aggressive R and D programme, holds over 2800 worldwide patents, and introduces about 100 innovative new products to the market every year. Request a free brochure from Festo ...
• Festo: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
