Product category:
Pharmaceutical/medical manufacturing: production equipment
News Release from: Festo | Subject: Pneumatic systems in tabletting simulator
Edited by the Manufacturingtalk Editorial
Team on 29 November 2006
Pneumatically driven hoppers up
flexibility
In a tablet compaction compaction simulator, a three-hopper feed system to produce multi-layer tablets is positioned pneumaticallyand vacuum ports keep die-plates clean.
When Huxley Bertram Engineering developed its latest ESH compaction simulator, it chose to completely update the electronics and control software and to implement a number of innovative design features, including a new three-hopper feed system to facilitate production of multi-layer tablets The hoppers are driven into position by pneumatic cylinders controlled by Festo valve terminals, and are fitted with vacuum ports to suck away any excess pharmaceutical powder and keep the die-plate clean
This article was originally published on Manufacturingtalk on 13 Apr 2004 at 8.00am (UK)
Related stories
Festo Sponsors Engineering Skills
Festo has again sponsored the UK Skill Mechatronics competition. The triumphant winners were Sharleen Jackson and Dave Rowe of the Warrington Collegiate team.
Pneumatic equipment comprehensively catalogued
Festo has launched a customised new catalogue, entitled 'Premier Products and Services 2001', covering essential items from the entire Festo product range.
ESH compaction simulators enable formulation scientists to model the mechanical behaviour of pharmaceutical powders during the compaction process.
The simulators are used extensively during the development of new commercial drugs, and can also be employed as test stations to investigate production issues.
Throughput is rarely an issue - most machines have a typical output rate of just one or two tablets per minute - but the important criteria are ease of use, simple parameter adjustment, the flexibility to accommodate a wide variety of tablet types and formulations, and above all, high accuracy repeatability.
Further reading
Pneumatic solutions? Ask for an Expotainer visit
Festo's Expotainer containing demonstrations of innovative pneumatics brings benefits of exhibition attendance, without the drawbacks, direct to the workplace.
Cylinders offer zero rotation under torque
Automation specialist Festo has announced a new range of precision cylinders with integrated guides to offer zero rotation under torque loads and minimal deflection under lateral loads.
Valve Terminal specifically for the food industry
Festo is to participate in this year's PPMA exhibition and is launching a number of products, including its latest Valve Terminal designed specifically for the food industry
Huxley Bertram's new ESH compaction simulator incorporates two high speed closed-loop servo-hydraulic actuators mounted on crossheads, controlled by a dual-channel digital system linked to a computer-based HMI (human machine interface).
The menu-driven software complies with the latest requirements of GAMP4 and the U.S Food and Drug Administration's 21 CFR part 11 guidance, includes full data traceability and operator identification, and facilitates fully automated tablet production, data collection and test results analysis.
The software enables a wide variety of production parameters to be measured - including humidity, ambient temperature, die temperature, punch temperature and die wall pressure - and can present all compaction analysis results in an easy-to-interpret graphical manner.
The simulator is constructed extensively from stainless steel to allow easy cleaning between different trial batches.
The new powder hoppers can be gravity fed or fitted with stirrers, are expressly designed for easy removal and cleaning, and can operate with as little as 5g of powder.
For multi-layer tablet production, the simulator can be equipped with up to three hoppers, each of which is driven into place above the system's die-plate by a pair of pneumatic cylinders.
The cylinders' vacuum control valve sub-system and associated air preparation equipment was developed specifically for the application by Festo.
According to William Bertram, managing director of Huxley Bertram, "Our original ESH compaction simulator was a four-pillar system, whereas the new one is a two-pillar design that has a much smaller footprint on the laboratory floor".
"Using compact pneumatic cylinders for powder hopper positioning has enabled us to minimise the system's work envelope, and with Festo's help we have implemented a very flexible control approach.
Most tabletting simulators on the market use cam-driven compression tooling, requiring the system to be mechanically reset whenever there is a change of tablet type.
Our new design provides a much more flexible solution - the entire compaction cycle is programmable, allowing very precise control and fast changeover to different tablet formulations.
And the ability to bring any of three powder hoppers into play at the drop of a hat adds considerable value to the process." In operation, the powder used to make the tablets is loaded into one or more hoppers, which are then sequentially driven into and out of position above the die-plate in the centre of the machine.
The powder falls into the die and the hopper is retracted, whilst a vacuum nozzle is energised to ensure that any loose powder is removed from the die-plate.
At this stage, the powder sits flush with the die table, and its level is checked by a laser sensor with a resolution of better than 0.1mm.
The shaped die and upper and lower punches define the finished dimensions of the tablet.
The servo-controlled hydraulic actuators located above and below the die are capable of providing up to 50kN of controllable compression forces, and are equipped with axially-mounted precision load cells and two LVDT (linear variable differential transformer) devices to provide feedback on distance travelled.
After compaction, the tablet is ejected into an output carousel, which is sized according to the type of tablets being produced - a typical unit would have 36 pockets.
The carousel is driven by a stepper motor with an integral encoder, enabling individual pockets to be identified and tracked for quality control purposes.
Huxley Bertram believes that its new ESH compaction simulator sets a new paradigm for flexible, easy-to-use pharmaceutical laboratory equipment.
* About Huxley Bertram Engineering - Huxley Bertram designs and builds specialist equipment for industrial processes and scientific research.
Founded some 20 years ago, the company has successfully completed more than 700 projects in the areas of automation, research and product development, including micromanipulators, advanced vision systems and precision optical manufacturing equipment.
The company is based in the Brookfield Centre, Cottersham, on the outskirts of Cambridge, UK.
For more information, please visit * About Festo - Festo manufactures pneumatic and electrical components and systems for automating industrial processes.
The company has an annual turnover in excess of EUR 1.4 billion, and has facilities in 176 countries around the world.
Festo operates an aggressive RandD programme, holds over 2800 worldwide patents, and introduces about 100 innovative new products to the market every year.
Request a free brochure from Festo ...
• Festo: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
