Product category:
Coordinate measurement arms, systems and software
News Release from: Faro UK | Subject: Platinum FaroArm measuring arm
Edited by the Manufacturingtalk Editorial
Team on 21 July 2006
Measuring arm checks completed F1 cars
The accuracy of the Platinum FaroArm enables the above checks to be carried out a completed F1 car, which would be very difficult and time consuming when using traditional CMM equipment.
The Super Aguri F1Team are the latest addition to the exciting and fast moving sport of Motor Racing The Team was formed at the end of 2005 and employs around 100 staff at its UK Headquarters at the Leafield Technical Centre in Witney /Oxfordshire
This article was originally published on Manufacturingtalk on 13 Mar 2008 at 8.00am (UK)
Related stories
3D laser scanner enhances image clarity
As well as offering greater clarity, accuracy and portability, 3D laser scanners have higher sensitivity for better detection of objects that are distant, darker and more oblique.
Metrology software made for portable CMM arms
Metrology software for portable coordinate measuring arms can easily change/convert between different measurement units or coordinate systems.
Super Aguri purchased an 8ft Platinum FaroArm in January 2006 and at present its primary use is to measure bodywork parts and fits and it is also used to carry out car legality checks prior to a Formula 1 race.
Additionally, the arm is also utilized to reverse engineer profiles for the driver's seat area to enable any necessary changes to be carried out on the car.
The accuracy of the Platinum FaroArm enables the above checks to be carried out on the completed car which would usually be very difficult and time consuming when using Traditional CMM equipment.
The FaroArm itself is internally counterbalanced for 'neutral buoyancy' and fatigue-free usage.
In fact, overload sensors prevent users from stressing the arm and help ensure precise measurement, making it 'the only arm with feeling'.
The FaroArm can be used anywhere to inspect, to reverse engineer or to perform alignments and CAD to part inspection with previously unheard of accuracy.
The FaroArm hardware is capable of interfacing not only with FARO CAM 2 Measure software , but also with a wide range of 3rd Party software suppliers which adds to the flexibility that the arm can offer.
At present Super Aguri are running Mitutoyo MCOSMOS-3 inspection software on the FaroArm.
Inspection manager Tim Nolan quoted: "Interfacing our existing Mitutoyo software with the arm has enabled staff to inspect and reverse engineer components without the need for additional software training, thus saving costs." Nolan also added: "Since the introduction of the arm, inspection and verification time of patterns and bodywork has been greatly reduced compared to carrying out the same exercise on a fixed bed CMM. Request a free brochure from Faro UK ...
• Faro UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
