Product category:
Monitoring and sensor equipment and systems
News Release from: Fluke (UK) | Subject: Handheld industrial test tools
Edited by the Manufacturingtalk Editorial
Team on 16 October 2001
Handheld test tools are rugged in design
Fluke will be showing a wide range of rugged handheld test tools suitable for all areas of industry, including the latest digital multimeters (DMMs), ScopeMeters and process calibration tools.
Fluke will be showing a wide range of rugged handheld test tools suitable for all areas of industry, including the latest digital multimeters (DMMs), ScopeMeters and process calibration tools Since the last Manufacturing Week, Fluke has introduced three new series of true-rms DMMs, the 110 Series, the 170 Series and the 180 Series, each with their own accuracy and resolution
This article was originally published on Manufacturingtalk on 20 Nov 2001 at 8.00am (UK)
Related stories
Loop calibrator can be operated with one hand
Fluke introduces new Loop Calibrator with an innovative, easy-to-use interface. Portable instrument's novel, one-handed operation gives technicians a free hand.
Downloadable application notes for ScopeMeters
Fluke has made available on its website, free, downloadable Application Notes for its handheld colour and monochrome oscilloscopes.
The 110 Series has an accuracy of 0.7% with 6000 counts of resolution, the 170 has 0.09% accuracy (maximum) also with a 6000 count display, and the 180 has 0.05% maximum accuracy with 50,000 counts of resolution.
All series offer clear readouts with most models offering backlit displays.
For enhanced troubleshooting, the Fluke 183 and 185 offer a relative mode, Min/Max/Average recording with time stamp and a Fast Min-Max mode to capture events as short as 1ms.
The latest 190 ScopeMeters are handheld digital dual-input oscilloscopes with bandwidths up to 200MHz and real-time sampling rates of 2.5GS/s.
A new firmware release adds powerful waveform mathematics capabilities.
It is now possible, for example, to multiply individual channel inputs to calculate power graphs.
This and many other easy-to-use functions are built into the version 4.0 firmware.
For process calibration, Fluke offers the 740 Series of Documenting Process Calibrators which includes the 744 model with HART support.
Also available are a comprehensive range of pressure calibrators, and a series of temperature calibrators which includes the latest Fluke 724 Temperature Calibrator.
Manufacturing Week 2001, NEC, Birmingham, 30 October 1 November 2001, Hall 19, Stand No.
9390. Request a free brochure from Fluke (UK) ...
• Fluke (UK): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
