Fluke releases the Fluke 719 calibrators

Fluke has brought out the Fluke 719 Electric Pressure Calibrators.

These lightweight devices feature a built-in electric pressure pump, making it possible to quickly calibrate and test pressure devices with one hand.

The Fluke 719 weighs less than one kg and operates on two 9V alkaline batteries.

Its battery powered pump is controlled by a thumb button, making it more convenient, faster and easier to use.

The electric pump can be programmed to set target pressures or limit pressure to eliminate over-pressurisation.

A cleanout port makes it easier to service the Fluke 719 without sending it for repair and minimises pump failures caused by accidental exposure to contaminating fluids.

Two models are available: the Fluke 719 30G, with a pressure range of -850mbar to 2bar, and the Fluke 719 100G, with a range of -850mbar to 7bar.

The Fluke 719 pressure calibrator features pressure measurement uncertainty of 0.025 per cent.

The device can measure and source mA with 0.015 per cent accuracy.

It can simultaneously measure pressure and source mA to test valves and I/P transducers.

The Fluke 719 can also simulate mA signals to troubleshoot 4-20mA control loops.

Back to top