Product category:
Robots and robotic systems
News Release from: Fanuc Robotics (UK) | Subject: Fanuc LR-Mate 200i, Fanuc M-710i, Fanuc M-710i W
Edited by the Manufacturingtalk Editorial
Team on 19 September 2005
Robots' crucial role on Audi assembly
line
BAW Precision Engineering has installed a second transfer gearbox assembly line into Borg Warner's Margam factory using proprietary automation equipment wherever possible.
BAW Precision Engineering has installed a second transfer gearbox assembly line into Borg Warner's Margam factory using proprietary automation equipment wherever possible Operating as a precision engineering company since 1973, BAW has had to adapt to the change in the manufacturing sector
This article was originally published on Manufacturingtalk on 30 Apr 2002 at 8.00am (UK)
Related stories
Off line programming trims routing cell costs
Two robotic routing cells which were engineered, programmed and built to a 'commissioning ready' state from CAD data alone, have recently been installed at an automotive components supplier.
GBP 1 million robotics spend increases efficiency
Two robotic machine cell management systems at a specialist automotive parts supplier helps it to meet customers' 'costs down' requirements as well as overcoming operator skills shortages.
The old business model saw precision engineering companies manufacturing to drawings supplied by customers with in-house design and tool rooms.
In the process of going lean most manufacturers have removed their in-house capability and passed that requirement on to the precision engineering sector.
Over the past 15 years BAW has embraced the need for change and has taken the model a step further.
Further reading
3D CAD robot simulation package drives cell design
Aimed at reducing robotic system design time and lengthy re-programming downtimes, a 3D simulation tool enables engineers to design, programme and prove efficient systems using a PC.
Robot unload system ups grinding cell utilisation
When a bearing manufacturer moved three independent grinding operations into one cell it was able to justify a robotic machine unload system.
Robot routing system minimises on site programming
The first of a new generation of 'Ready to go' fully enclosed routing cells has been designed to be 'up and running' and producing 'in tolerance' products within hours of unloading.
The company now offers a complete manufacturing service designing systems to manufacture components from tool design stage through to actual component assembly and test.
Building close partnerships with leading equipment suppliers such as Fanuc Robotics, BAW has a developed a strong understanding of design needs for efficient manufacturing automation.
When BAW engineered its first system for Borg Warner two and a half years ago - a transfer gearbox assembly system for Kia - it negotiated two year warranty periods with its strategic partners.
"We knew from past experience that Fanuc was reliable and we were confident in our own product's quality and reliability so it gave us and Borg Warner peace of mind," commented Steve Evans, sales manager at BAW.
A second installation was required when Borg Warner won the contract to supply the transfer gearbox for Audi's Q7 SUV.
Evans continued: "Once again we worked with the customer to provide the most economic solution, with full traceablity throughout and our chosen partners for this second system remained the same, in fact Borg Warner, on the basis of the robot's performance over the past two years has stated that Fanuc is its preferred choice," continued Steve.
Four robots are used on the Audi assembly cell.
The first robot, a six axis Fanuc LR-Mate 200i, applies adhesive to the casting and uses a laser bead tracking system, robots two and three are 45 Kg Payload Fanuc M-710i robots carrying out torquing operations and robot four, a 70Kg Fanuc M-710i W, handles the finished assembly in to a dynamometer.
Evans explained: "The whole line is designed as a 'no fault forward' system, a BAW solution.
There is no point in passing assemblies around the cell if they have failed at an earlier station, effectively this would mean you were handling scrap around the cell.
At each operation area we have a rework station that allows corrections to be made by operators should assemblies fail.
During assembly we continually check that the correct parts for each derivative are present, if they are not we don't allow the assembly to proceed.
We automatically test for leaks, oil fill and finally the assembly is checked on a dynamometer." Robot four unloads the gearbox from the assembly line and holds its data label to a reader, which identifies if the gearbox has passed for the dynamometer test, if it passes, the variant identity is read to the dynamometer.
Assemblies failing in this area are placed on to a reject conveyor within the cell and gearboxes passing the dynamometer test are sent to a pick up area.
The target assembly time for gearboxes is 90 seconds and the cell is designed to operate at 80 seconds allowing the overall system to work well within specification.
"To achieve this we specified the robots to be working well within their capacity, on average they work at 50 per cent capacity.
We've found that the OEE (overall equipment efficiency) of the first Kia cell to be in excess of 94 per cent, which is a credit to all our partners supplying equipment," added Evans. Request a free brochure from Fanuc Robotics (UK) ...
• Fanuc Robotics (UK): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
