Product category:
Robots and robotic systems
News Release from: Fanuc Robotics (UK) | Subject: FANUC R2000iA robots with 3D laser vision
Edited by the Manufacturingtalk Editorial
Team on 17 March 2006
Intelligent robots reduce assembly
tooling
In a new approach to vehicle floor pan assembly, Nissan has discarded framing jigs on initial spot welding by using robots with intelligent control and integrated 3D laser vision systems.
Find a successful and cost effective method of buildings cars and duplicate the production system anywhere in the world - that is the Nissan method and it is a positive way to generate a dynamic production system that's always looking to increase efficiency Nissan's Sunderland plant is the first European plant to implement the company's new approach to floor pan assembly
This article was originally published on Manufacturingtalk on 30 Apr 2002 at 8.00am (UK)
Related stories
Off line programming trims routing cell costs
Two robotic routing cells which were engineered, programmed and built to a 'commissioning ready' state from CAD data alone, have recently been installed at an automotive components supplier.
GBP 1 million robotics spend increases efficiency
Two robotic machine cell management systems at a specialist automotive parts supplier helps it to meet customers' 'costs down' requirements as well as overcoming operator skills shortages.
The recent installation of a new floor pan assembly line, the first of its kind in Europe at Nissan's Sunderland plant, has effectively removed the need for framing jigs on initial spot welding operations.
Core to the lines effectiveness is the use of three FANUC robots with intelligent control and integrated 3D laser vision systems.
Three conveyor systems each bring sub assemblies - the engine compartment, and front and rear floor sections - to the robot handling area.
Further reading
3D CAD robot simulation package drives cell design
Aimed at reducing robotic system design time and lengthy re-programming downtimes, a 3D simulation tool enables engineers to design, programme and prove efficient systems using a PC.
Robot unload system ups grinding cell utilisation
When a bearing manufacturer moved three independent grinding operations into one cell it was able to justify a robotic machine unload system.
Robot routing system minimises on site programming
The first of a new generation of 'Ready to go' fully enclosed routing cells has been designed to be 'up and running' and producing 'in tolerance' products within hours of unloading.
Each sub assembly is loaded freely onto its respective conveyor without the use of tooling so when they arrive at the robot area positioning is inconsistent.
Each robot is a FANUC R2000iA, a six axes 200kg load capacity arm, fitted with a FANUC V500iA 3DL vision system to locate the panel position.
The robots handling the front and rear floor are each mounted on a servo driven linear axis allowing them to travel out to the conveyor pick up point.
The robot handling the engine compartment section is statically mounted next to the other two units.
When the sub-assemblies arrive at their respective pick up points each robot moves to its programmed panel location position.
At this point the vision system, which is interfaced directly to the FANUC RJ3i intelligent controller, quickly locates datum points allowing the panels orientation to be compensated for by the robot.
With the sub-assemblies firmly gripped, each robot moves to a position above the NC tooling station that also uses FANUC control.
In free space the robots interlock the panels together - firstly assembling the engine compartment to the front floor and then the third robot interlocking the rear floor section.
The three robots and the NC tooling station then move in unison to transfer the floor pan from the robots' grippers to the NC tooling posts.
At this point the 'locate and load' process is complete and further spot welding FANUC robots continue the assembly operations.
Chris Watt, engineer with Nissan European Production Engineering, commented, "The cycle time for the assembly is currently 56s although if required the line is designed to run at 47s.
Where we really benefit is in the ability to produce variants without lengthy tool change times.
Variants are programmed into the robot and the NC tooling controllers and conventional tooling and fixtures are not required." Watt said: "Using standard 'off the shelf' products has added value to this new line by removing the need for dedicated tooling.
The savings are not only on initial capital cost but also ongoing savings are gained.
Conventional tooling gets damaged and also wears causing non intelligent robots to need regular reprogramming. Request a free brochure from Fanuc Robotics (UK) ...
In addition to removing tooling errors, the need to compensate for slack, and worn conveyors is removed - this makes our conveyor requirements really straight-forward.".
• Fanuc Robotics (UK): contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
