Product category:
Safety relays, interlocks, control systems, electrical components
News Release from: Fortress Interlocks | Subject: eGard and AS-i
Edited by the Manufacturingtalk Editorial
Team on 15 December 2006
Modular system controls machinery access
Machinery safety specialist Fortress Interlocks has introduced an AS-interface (AS-i) control and safety base module for its eGard system.
Machinery safety specialist Fortress Interlocks has introduced an AS-interface (AS-i) control and safety base module for its eGard system, enabling eGard to be simply connected to an 'AS-i Safety at Work' control network in minutes This provides significant time savings over other systems
This article was originally published on Manufacturingtalk on 27 Aug 2001 at 8.00am (UK)
Related stories
Modular safety interlock slidebar is more robust
Fortress has extended its range of interlocks with the launch of a robust new design of its slidebar.
It can be used with the Fortress AmGard 2000 range of interlocks, to ensure operator protection.
Modular safety interlocks bridge a key gap
A range of modular interlocks successfully bridge the gap between trapped key and gate switch technologies.
eGard is a modular system that can control access to hazardous machinery, via gate switch and trapped key technology, and include simple machine or access controls such as push buttons, e-stops and lamps.
The AS-i base has two addresses: one for connecting the safety circuits and one for connecting the control I/O.
AS-i is a cable network system that allows machinery safety technology to operate in parallel with standard machine controls on a single network with a common communication protocol (Actuator Sensor Interface).
With the AS-i base module, installation of an eGard system on an AS-i network takes a matter of minutes from unpacking to commissioning.
The eGard modules are simply clipped together and the AS-i cable connected.
The extensive range of eGard modules enable the creation of an almost endless list of solutions.
The modularity also makes eGard extremely flexible, allowing quick addition or removal of modules (functions).
Compared to hardwiring it eliminates dual safety circuit cabling costs, provides comprehensive diagnostics and features patented error checking.
The AS-i base module features an LED status indicator and an AS-i standard 4 pin M12 quick connect fitting for connecting dual safety circuits and up to 4 inputs and outputs.
• Fortress Interlocks: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
