Latest news on Manufacturingtalk categorised by supplier
Mori Seiki UK
Address:
4060 Lakeside Solihull Parkway
Birmingham
B37 7YN
UK
Telephone: (UK) 0870 240 9500
http://www.moriseiki.co.uk
Our RSS feed for news from Mori Seiki UK
Request to receive our free email newsletter each week
Listing of all 81 news releases from Mori Seiki UK:
Mori Seiki wins GBP 3.8 million orders at MACH '08
Builder of machining centres and turning centres, Mori Seiki, recorded sales of GBP 3.8 million at MACH 2008 and won an MWP Productivity Award during the show. Brochure available
News from Mori Seiki UK (13 May 2008)
5-axis machining centre can also turn parts
A 5-axis machining centre moves through its centre of gravity, avoiding out of balance forces, maximizes its rigidity with zero table overhang and can turn too. Brochure available
News from Mori Seiki UK ( 3 April 2008)
CNC multi-axis turning offers versatility, power
A CNC multi-axis turning centre has two spindles, two turrets and two Y-axis or, oprtionally, can be supplied with three turrets and three Y-axis. Brochure available
News from Mori Seiki UK (25 March 2008)
Turning centre has VMC power for milling
A mill-turn centre combines the power of a vertical machining centre with the capabilities of a lathe and offers thermal stability, very low levels of vibration and high damping. Brochure available
News from Mori Seiki UK (19 March 2008)
Machining and turning centres focus on rigidity
'Pure Technology' applied to machining and turning centres focuses on driving at the centre of gravity to achieve very low levels of vibration and high levels of rigidity and speed. Brochure available
News from Mori Seiki UK (29 February 2008)
Machine tool firm acquires French tooling
Mori Seiki Co in Japan has reached an agreement to take over the business of Sandvik Tobler SAS, France, which is a part of the Sandvik Tooling business area. Brochure available
News from Mori Seiki UK (27 November 2007)
CNC machining cell shortens lead-times
User application article Aerospace manufacturing company's investment in a flexible machining cell will increase profitability and flexibility and will be able to offer a rapid turnaround for components. Brochure available
News from Mori Seiki UK (26 November 2007)
Three turning centres give a racing advantage
User application article Three CNC turning centres installed at a motor sport Formula One's workshop have produced a ten fold improvement over their previous manufacturing capability. Brochure available
News from Mori Seiki UK (26 November 2007)
EMO 2007 brings CNC machine tool sales
Mori Seiki UK reports significant CNC machine tool sales from the 2700m2 stand at EMO 2007 and advises a second showing of the latest machines in Paris, France, in November. Brochure available
News from Mori Seiki UK ( 1 November 2007)
Turning centre for precise components
User application article A Mori Seiki NL2000SY Turning Centre was ordered on the stand at EMO Hanover show by Ottaway Engineering for the production of precise and intricate components. Brochure available
News from Mori Seiki UK (10 October 2007)
Mill-turn centre machines bike parts in one hit
User application article Mill-turn centre cuts out the handling operations so that a mountain bike parts manufacturer can operate more machines with the same number of people, while reducing costs and improving quality. Brochure available
News from Mori Seiki UK (29 August 2007)
Machining centres and mill-turn centre unveiled
Three new machine tools from 27 exhibits on the Mori Seiki stand will be a 5-axis vertical and a horizontal machining centre, and a three-turret mill-turn centre with Y-axis. Brochure available
News from Mori Seiki UK ( 6 August 2007)
Larger CNC lathe turret option added
For machining complex parts or carrying out long periods of unmanned machining, a 20-tool station turret can now be fitted as an option to Mori Seiki NL series of CNC lathes. Brochure available
News from Mori Seiki UK ( 1 August 2007)
Mill-turn centre does complex work, pays well
User application article A prototypes, models and component maker realised a good return on investment in a mill-turn centre, which has already paid for itself and contributed to a company turnover growth of 20%. Brochure available
News from Mori Seiki UK (30 July 2007)
Linear motors speeds 5-axis HMC movements
User application article Horizontal machining centre incorporates linear motors on its tilting axis which allows all the 5-axis movements to operate at full speed and greatly increasing the machine's overall performance. Brochure available
News from Mori Seiki UK ( 3 April 2007)
HMCs reliably machine tough alloys
User application article Reliability and rigidness are paramount in a horizontal machining centre when machining forged stainless steels and titanium alloys in cuycles of up to 40h. Brochure available
News from Mori Seiki UK (28 March 2007)
5-axis vertical machining centre has high speed
A 5-axis control vertical machining centre that offers five axes and five sided machining of complex components up to 300kg can turn them too. Brochure available
News from Mori Seiki UK ( 7 December 2006)
Mill-turn flexibility frees up machining centres
User application article The flexibility offered by a mill-turn centre has enabled a machinist of complex parts to review methods and transfer work from machining centres and reduce cycle times. Brochure available
News from Mori Seiki UK (30 October 2006)
Mori Seiki wish to acquire Dixi machine tools
It is Mori Seiki's intent to purchase the Swiss Dixi precision machine tool manufacturing facility and continue the machines' design, manufacture, distribution and service. Brochure available
News from Mori Seiki UK (20 October 2006)
HMC offers highest linear axes acceleration
A high-speed, high-precision horizontal machining center, which applies 'Driven at the Center of Gravity' theory, has world's fastest acceleration and rapid traverse rate on all linear axes. Brochure available
News from Mori Seiki UK (19 September 2006)
Orders for 250 'Dura' VMCs and CNC lathes recorded
Mori Seiki machine tools produced at Chiba No 2
Second four-axis machining centre acquired
180 Mori Seiki NL series lathes ordered/month
VMCs' vibration-free machining can save 22%
Mill/turn centre cuts machining times by 40%
Mori Seiki buys 100% of Fredk Pollard
Minimised HMC vibrations raise machining quality
Precision, performance helps markets grow
Mori Seiki's NL CNC lathes top 2000
Mill/turn centre has HMC capability
Lathe turret wins JSME new technology medal
One-hit turning frees machining centre
Compact VMC provides power without vibration
Mori Seiki gears up for growth
HMC + lathe equals integrated mill/turn centre
Pollard beats Mori Seiki UK sales target
Mori Seiki opens technology centre in Paris
First Pollard open house was well attended
Pollard opens northern UK showroom
Mill/turn centres eliminate mechanical seal errors
Multi-pallet handling puts skills to better use
Powerful VMC benchmarks tooling
Mori Seiki opens UK Technical Centre
Racing ahead to forge links with industry
Machine tool sales prompt new recruitment
Cost effective choice for subcontracting
Machine tool innovation gains Japanese award
Five-axis vertical machining centre with turning
Dynamic analysis and DCG for machine tools
Lateral thinking means that 2 and 2 makes 5
Productivity Show to demonstrate latest machining
Open house to show off latest CNC lathes
C of G technology plus 5-axis up productivity
High speed VMCs speed mould and die production
Mill-turning centre eliminates multiple set-ups
Titanium orthopaedic implants milled reliably
'Final word' VMC cuts cycle times by up to 20 %
How to design and develop the ultimate VMC
Linear motor driven axes HMC halves cycle times
CNC chuckers up synchroniser rings output
Small parts machined with minimum downtime
Vertical workhead simplifies handling on grinder
Heavy-duty MillTurn centre machines complex parts
Mill-turning centre offers generous Y-axis
Builder offers extensive workholding and tooling
Automatics machine tough materials unmanned
Turnkey package offers unmanned turning service
Compact CNC chuckers offer plenty of power
Long-bed machining centre is built for speed
Compact five-axis VMC offers high capacity
System proves more versatile than pallet shuttles
Twin-spindle front-loading chucker doubles output
HSM Reduces Factory Lead-Times for Pumps
Mori Seiki introduces heavy duty five-axes M-C
M-C packages suit individual mould and die needs
Two equal turrets mill independently
High speed machining centre reduces downtime
CNC sliding head automatics use soluble oils
Double spindle construction increases accuracy
Rotary transfer machines are flexible and fast
