Product category:
Electrical systems
News Release from: Fairford Electronics | Subject: Soft starters
Edited by the Manufacturingtalk Editorial
Team on 03 March 2005
Energy survey brings in soft starters
The value of energy surveys was underlined by the of six soft starters to moulding machines, which are saving up to £351/year - ensuring payback within a year.
The value of energy surveys was underlined by the of six soft starters to moulding machines, which are saving up to £351/year - ensuring payback within a year The value of energy surveys was underlined recently at Numatic International following the visit of a consultant from the South West and Action Energy Scheme
This article was originally published on Manufacturingtalk on 18 Nov 2003 at 8.00am (UK)
Related stories
AC drives - how much energy is being wasted?
The potential for saving energy when using AC induction motors has been largely ignored, but worthwhile savings can be achieved using energy optimising soft starters.
Soft starters connect directly into the delta
Soft starters connect directly into the six wire delta connection, saving users the cost and time of rewiring complete AC motor starter systems.
The findings of the survey have resulted in the fitment of six Fairford QFE soft starters to moulding machines at Numatic's plant.
These units are delivering savings of up to £351 per annum, in the best case, on the operation of the moulding machines, a figure that ensures payback for the QFE unit of just one year.
Numatic International is the UK's largest manufacturer of vacuum cleaners, floor polishing machines and janitorial equipment.
Further reading
Soft starters overcome excessive torques
Soft starters are overcoming problems associated with excessive torque on start-up with a number of 15kW mixer motors at Kernow Coatings in Cornwall.
Control card upgrades soft motor starters
Electronic card can replace existing control cards to upgrade soft starters and to achieve increased motor functionality at low cost and includes the facility for a remote keypad for easier set-up.
Located in Chard in the South West of England, the company employs 650 people, operates 24 hours a day and produces over 3,000 products per day.
As part of its ongoing drive to efficiency, Numatic recently invited a consultant from the Government Office for the South West and Action Energy Scheme to conduct an energy audit at its manufacturing plant.
One of the focus areas of the audit was the large kW motors used on the company's plastics moulding machines.
The motors, ranging from 30kW to 75kW, were all controlled by Star/Delta starters, a popular arrangement for AC motors, but one which does not provide any opportunities for energy saving during motor running.
Following the survey a recommendation was made to run a test programme on the moulding machine motors to determine the savings in running costs that could be achieved using soft starters.
Two companies, Fairford being one, were contacted and invited to undertake the test using their own equipment.
The tests compared the KWH figure of the motor with the soft starters in bypass and also (in Fairford's case) in standard energy optimising mode.
The results were positive in every case.
The average saving across the six motors was £165 per annum: the largest saving being £351 on a 37kW motor and the lowest £92-40 on a 55kW machine.
These figures were arrived at using data from Numatic regarding annual hours run of the machines and the unit cost of electricity (0.048p).
Based upon these projected savings, six of Fairford's QFE energy optimising soft starters were ordered by Numatic and are now in full operation at the plant.
"The positive outcome of our energy analysis and test procedure highlights the latent savings to be had in any manufacturing organisation," says Andrew Smith of Numatic International.
"As a company we are accredited to ISO:14001, for our Environmental Management Systems".
"This underlines our commitment to achieving energy efficiency, both to fulfil our environmental obligations and to help offset the consistent rise in the cost of energy.".
• Fairford Electronics: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
