Product category:
Industrial consultancy services
News Release from: Frost and Sullivan | Subject: European Technical Applications for TPE
Edited by the Manufacturingtalk Editorial
Team on 27 November 2002
TPE awareness has to be improved, says
report
Thermoplastic elastomer (TPE) producers must break down barriers to market development and raise awareness of end-users about the total system cost and marketing benefits from using TPE.
Thermoplastic elastomer (TPE) producers must break down barriers to market development and raise awareness of end-users about the total system cost and marketing benefits from using TPE rather than natural and thermoset rubber, claims a new report from international market consultants Frost and Sullivan Total revenues from TPE compounds in technical thermoplastic applications were $913 million in 2001 against $776 million in 1998
This article was originally published on Manufacturingtalk on 28 Apr 2004 at 8.00am (UK)
Related stories
Technical performance ranks high in PPE market
Analysis of the European personal protective equipment market reveals that end users primarily evaluate technical performance of products, followed by price and customer service.
Furniture adhesive users value performance
Latest research from international market analysts Frost and Sullivan reveals that in the European furniture and woodworking adhesives business, customers value product performance over price.
Market revenues are projected to reach $1,299 million in 2008.
This represents a compound annual growth rate of 5.2 percent during the period 2001 to 2008.
The replacement of traditional materials such as natural and thermoset rubbers has been successful owing to the ease of processing, performance properties and recyclability of TPE.
Further reading
Transmitter role changes to increase efficiency
The most important task for control engineers today, says Victoria Whiting, Frost and Sullivan, is to increase the economic efficiency of their industrial plants.
Conference to review European workwear market
Frost and Sullivan to Host Interactive Analyst Briefing on the European Market for Workwear, February 5, 2002.
This replacement is likely to continue to drive demand during the next five years.
However, there may be significant barriers to the further replacement of rubber by TPE.
"Rubber processors have been reluctant to invest in thermoplastic processing technology because of high switching costs, and are generally unconvinced about TPE performance versus traditional rubbers.
In addition, the rubber processors have long-standing relationships with OEMs in many traditional markets where TPEs need to penetrate in order to sustain growth.
This will raise entry barriers for thermoplastic elastomer producers," explains Brian Balmer, Research Analyst in the Performance Materials team.
As penetration rates for TPE in existing applications increase, it will become more difficult to find new areas for market development.
TPE producers are responding to this challenge by expanding the range of performance properties to permit entry into new market sectors where rubber still dominates.
Improving compression set, adhesion to other polymers and metals, softness, UV resistance, chemical and oil resistance and vibration damping, are the principal properties on which TPE producers are focusing attention.
In the future, manufacturers should look to automotive sealing systems, medical products and 'soft touch' consumer products, where there is still scope for further rubber replacement.
Success will depend on the close co-operation between end-users and the suppliers' R and D and technical service teams.
The report examines the key trends for technical applications in the Automotive, Extrusion, Consumer goods, Regulated products and Wire and cable market sectors.
Six broad TPE types are examined: #61607; Styrenics (mainly SEBS: Styrene-Ethylene-Butylene-Styrene).
#61607; Thermoplastic polyolefin elastomers (TPO).
#61607; Thermoplastic vulcanizates (TPV).
#61607; Thermoplastic polyurethane elastomers (TPU).
#61607; Copolyester thermoplastic elastomers (COPE).
#61607; Copolyamide thermoplastic elastomers (COPA).
European Technical Applications for Thermoplastic Elastomers Markets B103.
• Frost and Sullivan: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
