Product category:
Cutting lubricants, coolants, systems and treatment
News Release from: Glanon International | Subject: Glanon Machine Coolant Filtration Systems
Edited by the Manufacturingtalk Editorial
Team on 13 May 2003
System removes cutting lubricant
contaminants
The leading preventable cause of CNC Machine Downtime is premature tool wear and replacement, but can be minimised by a system removes cutting lubricant contaminants quickly and efficiently.
The leading preventable cause of CNC Machine Downtime is premature tool wear and replacement Without proper maintenance, your CNC Machine tool life span may be reduced by up to 65%
This article was originally published on Manufacturingtalk on 2 Apr 2007 at 8.00am (UK)
Related stories
Filtration removes oil contaminants
Gllanon's filtration system removes contaminants from hydraulic oil quickly and efficiently.
User friendly filtration for machine tools
Glanon International is a manufacturer of Portable Filtration Systems for Industrial Oil and Coolant, all Glanon Filter-Carts are user friendly tools that make Industrial Fluid Recycling easy.
This leads not only to costly tool replacement, but to expensive down time as well.
Combine that with new, stricter environmental regulations concerning the disposal of waste coolant, and you have a potential operating capital drain.
This machine application Requires circulating coolant.
Particulate matter from the machining process and the environment as well as biological growth are the enemies of the coolant.
Our system removes these contaminants quickly and efficiently.
Our portable systems will connect to your machine sump through two 1-2 lines.
The units can be equipped with quick connect/disconnect fittings.
The flow rates range from 3 - 24 gal/min and filter through three filtration stages.
Using a cycle of passes through the system, 98 percent of all contaminants are removed from the coolant.
This simple service can extend your coolant life 5 - 10 times or more.
The Glanon Machine Coolant Filtration Systems are shipped from the factory equipped and ready for immediate service.
Portable and easily maneuverable, these systems can service multiple machine reservoirs in a single day.
CNC Machines can easily be serviced without manually draining and refilling the coolant.
Coolant system maintenance hours will be reduced, coolant life will be increased, and environmental impact will be minimized.
• Glanon International: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
