Product category:
Milling cutters
News Release from: Guhring oHG | Subject: Solid carbide taps and PCD insert milling
Edited by the Manufacturingtalk Editorial
Team on 07 October 2005
Solid carbide cutters tap holes in
steels
Among a wide selection of drills, taps, milling cutters and toolholders, Guhring introduced aolid carbide taps for threading steel and a PCD insert face-mill for non-ferrous alloys.
Among a wide selection of drills, taps, milling cutters and toolholders, Guhring introduced aolid carbide taps for threading steel and a PCD insert face-mill for non-ferrous alloys At EMO 2005, Guhringintroduced numerous innovative tooling and machining solutions for the rotary cutting tool sector
This article was originally published on Manufacturingtalk on 7 Oct 2005 at 8.00am (UK)
Related stories
PCD inserts feature high speed face-mill
For the economical high speed machining of non-ferrous metals such as aluminium, aluminium-alloys and copper, a range of face-mills holds three to 20 PCD inserts.
Solid carbide taps cut threads in steels
Following the development of a very tough carbide grade and new tooling geometries, solid carbide taps can be fed at high torque into steel components and offer long tool life.
The company also made available comprehensive information regarding these innovations and its entire tool and service programme available from the tool specialist in Albstadt, Germany.
Guhring presented the following innovative tooling and machining solutions in Hanover: * PF 1000 face milling cutter with PCD-milling inserts for the high speed machining of aluminium, aluminium alloys and copper; * World-premiere - solid carbide taps for the machining of steel; * RT 100 R Ratio drill with radius point geometry for the machining of new materials such as CGI and ADI as well as standard range ZB 80 two-fluted gun drills; * Revised solid carbide radius milling cutter programme; * TM Multi-Vend, the entry level solution for tool storage and administration; * LT 800 WP interchangeable insert drilling system for the production of large and deep holes up to diameter 100mm and a max.
drilling depth of 12 x D; * Solid carbide thread milling cutter range now includes types TM SP and DTMC SP; * GM 300 programme now includes MQL components, ISO taper products and new shrink fit systems; * TBV 216 universal grinding facility for single-fluted gun drills from 1.0 to 6.0mm diameter.
• Guhring oHG: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
