Product category:
Washing and pretreatment
News Release from: Guyson International | Subject: Formula 750 rotary table, hot aqueous washing m/c
Edited by the Manufacturingtalk Editorial
Team on 02 July 2002
Small automotive aluminium parts cleaned
quickly
Adaptation of a compact, rotary table, hot aqueous wash machine has been developed to provide the fast efficient cleaning of small aluminium automotive components.
This adaptation of the Formula 750 compact, rotary table, hot aqueous wash machine has been developed to provide the fast efficient cleaning of small aluminium automotive components The components being retained in a fixtured grid whilst subjected to hot wash and blow off with a very critical triple filtering system ensuring removal of all particulates
This article was originally published on Manufacturingtalk on 23 May 2001 at 8.00am (UK)
Related stories
Robotic cell deburrs air tool components
Atlas Copco has installed a robotically integrated, beadblast finishing cell to lightly deburr and cosmetic finish a range machined rotors, gearshafts, housings and nuts.
Keying surface produced for anodising
When Bodycote a world leader in metal technology, were faced with a demanding finishing problem, coupled with an extremely tight delivery deadline, they approached Guyson International for help.
Stainless Steel - the body and front access door of the machine are manufactured in stainless steel, with the front sliding door opening fully to give maximum access to the 630mm x 300mm chamber inside of the machine.
Precise cleaning - the Components are placed on the fixtured rotating table and spray washed by a series of jets, which are positioned above, below and to the side of the turntable.
The internal spoked rotating table is chain driven and components pass through a curtain of hot aqueous cleaning solution discharged from strategically mounted high-pressure jets.
These are fed by a high velocity stainless steel pump delivering 100 litres a minute, enough to clean the most stubborn machining stains and clear swarf from channels.
Filtration - the cleaning solution is returned to the wash tank though a basket filter, then through 100micron in-line filter with washable element and finally through a 25micron filter with disposable element to guarantee cleanliness.
This version of the 750 is also equipped with a compressed air blow off system above the components for drying and to help with reducing their temperature.
Operator panel - process complete light, low water level and wash and air dry timers are located in a highly visible position at the front of the machine for ease of use. Request a free brochure from Guyson International ...
• Guyson International: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
