Ultrasonic cleaning baths can be programmed

Ultrasonic cleaning baths can be programmed to maximise the quality and repeatability of results by pre-setting exact cleaning times and temperatures, ensuring consistent cleanliness.

Guyson International - who acquired Kerry Ultrasonics early in 2004 - is now providing manufacturing, sales, support and service from its extensive 10,000m2 facility in Skipton in the North of England, for their broad range of Kerry bench-top ultrasonic cleaning baths.

Pulsatron MKC baths can be programmed to maximise the quality and repeatability of results, allowing the user to pre-set exact cleaning times and temperatures, ensuring consistent levels of cleanliness from batch to batch and providing an affordable way to provide quality precision cleaning in areas such as, optical and electronic manufacturers, medical and dental technical workshops and aerospace and metal-finishing subcontractors.

The MKC units can thoroughly remove swarf, oil, grime, flux and other contaminants from a wide range of new and refurbished components, including those with highly intricate shapes.

And with ultrasonic cleaning being inherently gentle, this makes it particularly suitable for less robust products such as printed circuit boards or precision parts.

MKC baths are available in capacities of 6, 14 and 22 litres to suit different workloads.

Operating temperatures from 20 to 80 degrees Centigrade can be set in 1-degree increments, allowing the optimum temperature to be selected for a particular combination of component material, cleaning solution and contaminant.

All functions are controlled by a simple four-button membrane keypad.

An LCD panel displays the temperature and time set by the user, the time elapsed since the start of the cleaning process, and the status of the power supply, heater and ultrasonics.

Smaller units are also available with 2 and 3 lire capacity Pulastron KC baths.

KC baths being particularly easy to use, with a simple on/off switch for the ultrasonics and operating instructions printed on the bath's front panel.

Cleaning of lightly soiled items such as medical and dental cleaning applications, electronics or optics may take only seconds.

Removal of medium soil may take two or more minutes.

Back to top