Air blasting is faster than manual deburring

Compressed air blasting system can help you achieve new levels of precision, speed and efficiency in many industrial blast cleaning or finishing operations.

Recognised worldwide as the highest quality available, a Guyson Euroblast system can help you achieve new levels of precision, speed and efficiency in many industrial blast cleaning or finishing operations.

Guyson Euroblast blast equipment offers a faster alternative to labour intensive operations such as hand deburring, scraping and wire brushing, chemical cleaning, acid etching, liquid honing, knife trimming, sanding, grinding and many others.

It is the ideal solution for component producers, reconditioners and remanufacturers seeking to replace these slower and more labour intensive methods.

Guyson blasting uses compressed air to propel blast media directly at the component through an exclusively designed blast gun.

These clean and safe operations are housed in an illuminated cabinet from which dust is constantly removed and the blast media recycled to provide a continuous and reliable cleaning and finishing system.

* Suction or pressure feed systems - there are two types of Guyson EuroblastR installations, both capable of using a wide selection of blast media at alternative pressures; pressures low enough to blast delicate parts and high enough to handle the most demanding cleaning and finishing operations.

* Delicate and precise finishes - suction Feed Suction feed cabinets are generally selected for light-to-medium production requirements and limited space.

A suction feed system uses a venture siphoning action to draw the media into the compressed air stream within the gun nozzle itself.

One pass of the nozzle removes foreign matter in seconds and quickly produces a clean uniform surface finish.

A typical system combines a Euroblast cabinet and one of the Guyson range of efficient dust collectors.

The use of a media cyclone separator is optional with suction feed systems.

* Controlled power - pressure Feed Designed for speed, giving faster cleaning times (up to four times faster than venture systems) to meet higher production requirements, pressure feed cabinets are excellent for removing tough, hard scale and deposits particularly within hard-to-reach recessed areas and complex shapes.

The use of a pressure vessel forces a dense flow of media to the blast nozzle at high impact velocities.

This is particularly important where dense metallic grits are used to impart deep surface etching prior to bonding or coating.

A media cyclone separator is standard with pressure feed systems.

For further information on which Guyson blast system would be best for you, prospective users of its manual or automated blast systems are encouraged to submit sample components for free feasibility testing to the companies extensive development workshop at Skipton, North Yorkshire, England.

Back to top