Product category:
Large milling and boring machines (over 2000mm in X)
News Release from: Goratu UK | Subject: Lagun GBM CM 8 Travelling Column Milling Machine
Edited by the Manufacturingtalk Editorial
Team on 14 September 2007
Travelling column CNC machine mills 10m
parts
Work pieces up to 10m long, with little limitation on weight, can be machined on a travelling column CNC milling machine design, which is available in several sizes.
The Lagun GBM CM 8 Travelling Column Milling Machine will be shown at EMO 2007 as a representative of a large range of heavy duty CNC machine tools built by Goratu, Spain Goratu Maquinas Herramienta builds the range of travelling column CNC milling and boring machines for taking on the machining of parts up to 10m long
This article was originally published on Manufacturingtalk on 9 Sep 2004 at 8.00am (UK)
Related stories
High precision VMC suits mould and die work
High precision, heavy duty vertical machining centre, particularly suited to the mould and die industry, features heavy stock removal rates as well as precision finish machining.
There are hardly any workpiece weight limitations as the carriage-column assembly carries out the longitudinal movement.
On the other hand, it also enables pendular work - it is possible to have two separate work areas.
This makes it easier for the machine to work in an area while the machinist is preparing the next workpiece in the other area.
This machine series is available with several dimensional configurations.
The length of the X-axis can be selected in the range of 3, 4, 5, 6, 8, or 10m in length.
They have a 1200mm Y-axis and a 1500 or 2000mm Z-axis.
* Goratu Maquinas Herramienta at EMO 2007, Hannover, Germany, September 17-22, Hall 13, Stand C35.
• Goratu UK: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
