Product category:
Special purpose and multi-function tooling, broaching, etc.
News Release from: G and J Hall | Subject: Multicut step-drill
Edited by the Manufacturingtalk Editorial
Team on 24 June 2002
One step drill does fourteen times the
work
Just one Multicut step-drill can achieve as much as 14 twist drills or hole-saws from one tool - saving time and money - and is 14 times easier for burr-free holes. Engineers throughout the world are
Just one Multicut step-drill can achieve as much as 14 twist drills or hole-saws from one tool - saving time and money - and is 14 times easier for burr-free holes Engineers throughout the world are achieving consistently reliable, cost-effective results in a wide range of drilling applications using GandJ Hall's high-performance range of Multicut HSS step drills
This article was originally published on Manufacturingtalk on 11 Feb 2002 at 8.00am (UK)
Related stories
Cut holes in thin sheet without fuss
A range of tooling offers speedy, cost-effective, reliable solutions for the enlargement or the neat finishing of holes, especially in thin materials.
Step drill also deburrs hole in many materials
HSS step drills achieve reliable and cost-effective results in a wide range of materials from plastics to stainless steel, and the radius joining each step deburrs the hole.
Multicut is capable of producing or enlarging holes in materials up to 10mm thick and is designed for use with power tools or pedestal drilling machines for an extensive range of industrial applications.
Each step produces specific sized, parallel holes, with the maximum material thickness being determined by the length of step.
The ground profile of the Multicut allows controlled drilling up to 60mm diameter in a hand-held drill.
The non-slip point eliminates the need for a pre-drilled hole, whilst the smooth multi-flute action creates round burr-free holes.
In addition to an extensive range of general application tooling, Multicut offers a range of dedicated products for electrical and other specific applications.
Many of the Multicut drill diameters are key electrical sizes, whilst ISO and PG conduit sizes are covered by tools specifically for these applications.
Multicut drills are manufactured from high speed steel, resulting in long tool life and extra durability.
Other value-added benefits include controlled drilling; burr-free holes; up to 14 conventional drill sizes on one tool; drills material up to 10mm thick; non-slip point - needs no centre punch; no flexing of drill whilst drilling; multi-flute design; drills diameters from 4mm to 60mm; enlarges existing holes; shank will not slip in chuck.
• G and J Hall: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
