Product category:
Machine and production line ancillaries, miscellaneous equipment
News Release from: Harting | Subject: Har-bus HM+ range connectors and press-in m/cs
Edited by the Manufacturingtalk Editorial
Team on 25 September 2001
Enhancing efficiency in electronics
manufacture
At the Productronica Exhibition (Munich, Germany, 6-9 November 2001), Harting is featuring two major new products aimed at enhancing productivity and cost efficiency in electronics manufacture.
At the Productronica Exhibition (Munich, Germany, 6-9 November 2001), Harting is featuring two major new products aimed at enhancing productivity and cost efficiency in electronics manufacture: a new range of high-temperature connectors compatible with the latest automated production processes; and the latest developments in its range of component press-in machinery The company is announcing a number of new additions to its har-bus HM+ range of hard metric 2mm connectors, which are fully compatible with the latest high-temperature surface-mount production processes
This article was originally published on Manufacturingtalk on 4 Jul 2008 at 8.00am (UK)
Related stories
Fast Ethernet media converter has PoE capability
A Fast Ethernet media converter is designed to ease the migration to optical-fibre communication where electrical Ethernet data transmission reaches the limits of its performance.
Harting Ethernet switch offers high availability
Harting's industrial Ethernet switches range is believed to be the first to offer ring redundancy to achieve high system availability, while simplifying network configuration and ease of operation.
The new devices can be directly mounted by automated pick-and-place technology, enabling soldering at the same time as other surface-mount components.
The new connectors have been designed to exploit the latest developments in simultaneous double-sided reflow soldering (SDSRS) and pin-in-hole intrusive reflow (PIHIR) technology.
Harting has integrated open ventilation slots into the wafers and connector housings to provide free air flow, guaranteeing good heat distribution and providing homogeneous heat dissipation to aid uniform cooling of the soldered joints.
Further reading
Hybrid connector handles Ethernet and power
Hybrid connector integrates Ethernet and power connections into a single compact unit for ease of installation in industrial machines.
Shielded Ethernet module connects eight data lines
A shielded Ethernet module, which connects all eight data lines, fulfils Category 5e requirements and has been added to a family of heavy-duty industrial connectors.
Ethernet switch has external configuration memory
An industrial Ethernet switch has external configuration memory retains all the switch settings so that when a new switch is connected, it starts up automatically without reconfiguration.
Also featured is the new Harting CPM Prestige: a semi-automatic component press-in machine combining short cycle times, advanced sensing technology and an easy-to-use graphics interface - making it highly productive, versatile and easy to use.
The CPM Prestige is a flexible machine suited for both high-volume and low-volume production with a variety of printed-circuit-board types and configurations.
It is equally suited to use with daughter cards, backplanes or custom boards, with set-up time for tools and equipment taking only minutes.
The CPM Prestige is equipped with a universal cut-off algorithm referred to as 'Autosense'.
This continuously records data on the machine's press-in forces and distances, and automatically calculates cut-off points for each connector without the need for any pre-adjustments for connector type, board thickness, hole diameter, compliance zone configuration or vendor.
The machine uses an integrated graphical visual guiding system, in which the operator is guided through the complete press-in process by an easy-to-use Visual Basic interface.
A touch-sensitive monitor shows all the necessary data (connector position, connector type etc.) in real time, with control being carried out by fingertip touch.
The CPM Prestige is the first machine of its type to have a 100kN press-force capacity.
In addition, a special C-Type frame is combined with a technique known as automatic deflection compensation, which ensures that the frame compensates for all deflections even under the heaviest load.
The press-in technique is based on flat-rock tooling and flat-rock compatible connectors using inserts supplied by Harting.
A movable magnetic plate is used to position any number of male inserts into the connectors to convert them into flat-rock compatible components.
The machine is based on a modular design, allowing spare parts to be exchanged quickly and easily.
By using a modem or an existing LAN connection, the service technician can log onto the machine and detect any faults in the electronic parts or software units remotely.
Comprehensive reports of sensors, process data and even malfunctions are stored regularly.
Software upgrades, support and set-up parameters can also be implemented remotely from the desk of a systems engineer.
This drastically reduces the costs of maintenance visits and machine downtime.
• Harting: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
