Product category:
Electrical systems
News Release from: Harting | Subject: D-Subminiature connectors
Edited by the Manufacturingtalk Editorial
Team on 01 May 2003
Rugged bus interface system offers EMC
protection
D-Subminiature connectors and RF shielded diecast hoods combine ruggedness and excellent EMC performance for applications such as industrial fieldbus systems and power supplies.
InduCom from Harting is a new family of D-Subminiature connectors and RF shielded diecast hoods which combine ruggedness and excellent EMC performance for applications such as industrial fieldbus systems, power supplies and transportation Designed to meet the requirements of the DIN 41652, MIL-C-24-308 and IEC 60 807 standards, InduCom includes hoods capable of housing D-Sub connectors with 9-50 ways, with one, two or three cable entries
This article was originally published on Manufacturingtalk on 4 Jul 2008 at 8.00am (UK)
Related stories
Fast Ethernet media converter has PoE capability
A Fast Ethernet media converter is designed to ease the migration to optical-fibre communication where electrical Ethernet data transmission reaches the limits of its performance.
Harting Ethernet switch offers high availability
Harting's industrial Ethernet switches range is believed to be the first to offer ring redundancy to achieve high system availability, while simplifying network configuration and ease of operation.
In addition, a version known as InduCom 9 incorporates an extended rear housing that enables bus interfaces or customised PCBs to be included.
The zinc diecast material of the InduCom hoods, coupled with their labyrinth design and crimp flange assembly, guarantees exceptional EMC/RFI protection, with shielding attenuation better than 60dB up to 500MHz.
The vibration-resistant crimp technology also aids mechanical strength by providing continuous pressure on the cable, with good strain relief and pull-out resistance as well as anti-rotational security.
The crimp flange approach allows for easy assembly with consistent quality, and makes it possible to use the connectors with thicker cables: up to 13.5mm diameter for a 9-pole hood.
Turned and stamped male and female crimp contacts guarantee an optimised electrical and mechanical connection between the cable and the crimp contact.
For turned contacts, Harting offers an ultra-precision hand crimp tool with an 8-impression crimp to ensure maximum tensile strength.
• Harting: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
