Product category:
Machine and production line ancillaries, miscellaneous equipment
News Release from: Harting | Subject: Five-pole connector
Edited by the Manufacturingtalk Editorial
Team on 02 May 2007
Five-pole connector for sensor
applications
Harting has introduced a 5-pole M12 connector designed for sensor applications where five connections are involved.
Harting has introduced a 5-pole M12 connector which uses the company's Harax easy-assembly IDC technique The Harax M12-L 5-pole device has been designed to meet growing industry requirements for sensor applications where five connections are involved
This article was originally published on Manufacturingtalk on 4 Jul 2008 at 8.00am (UK)
Related stories
Fast Ethernet media converter has PoE capability
A Fast Ethernet media converter is designed to ease the migration to optical-fibre communication where electrical Ethernet data transmission reaches the limits of its performance.
It is also compatible with industrial bus systems including the thin-cable DeviceNet and the Safety Bus P.
Cables with wire gauges from 0.25 mm up to 0.5 mm can be terminated using the time-saving Harax IDC technique.
Harax is a detachable insulation displacement connector system that combines the advantages of connectors and threaded cable glands in a single technology.
Quick, easy termination is accomplished by simply removing the cable insulation, inserting the individual, non-stripped wires into the Harax connector and tightening a screw cap.
No special tools are required.
The resulting gas-tight connection qualifies for an IP67 rating, making the system ideal for industrial applications.
Harax is also compatible with round cables containing a low number of strands, making it optimal for areas where sensors and actuator boxes are used.
• Harting: contact details and other news
• Email this article to a colleague
• Register for the free Manufacturingtalk email newsletter
• Manufacturingtalk Home Page
Search the Pro-Talk network of sites
